显示标签为“EMC”的博文。显示所有博文
显示标签为“EMC”的博文。显示所有博文

2014年5月7日星期三

E20-610 勉強の資料、E20-880 認定資格、E20-322 試験過去問

もしあなたはまだ合格のためにEMC E20-610に大量の貴重な時間とエネルギーをかかって一生懸命準備し、EMC E20-610認証試験に合格するの近道が分からなくって、今はIT-Passports.comが有効なEMC E20-610認定試験の合格の方法を提供して、君は半分の労力で倍の成果を取るの与えています。

IT-Passports.com提供した商品の品質はとても良くて、しかも更新のスピードももっともはやくて、もし君はEMCのE20-880の認証試験に関する学習資料をしっかり勉強して、成功することも簡単になります。

E20-322認定試験の資格を取得するのは容易ではないことは、すべてのIT職員がよくわかっています。しかし、E20-322認定試験を受けて資格を得ることは自分の技能を高めてよりよく自分の価値を証明する良い方法ですから、選択しなければならならないです。ところで、受験生の皆さんを簡単にIT認定試験に合格させられる方法がないですか。もちろんありますよ。IT-Passports.comの問題集を利用することは正にその最良の方法です。IT-Passports.comはあなたが必要とするすべてのE20-322参考資料を持っていますから、きっとあなたのニーズを満たすことができます。IT-Passports.comのウェブサイトに行ってもっとたくさんの情報をブラウズして、あなたがほしい試験E20-322参考書を見つけてください。

IT業種のEMCのE20-610認定試験に合格したいのなら、IT-Passports.com EMCのE20-610試験トレーニング問題集を選ぶのは必要なことです。EMCのE20-610認定試験に受かったら、あなたの仕事はより良い保証を得て、将来のキャリアで、少なくともIT領域であなたの技能と知識は国際的に認知され、受け入れられるです。これも多くの人々がEMCのE20-610認定試験を選ぶ理由の一つです。その理由でこの試験はますます重視されるになります。IT-Passports.com EMCのE20-610試験トレーニング資料はあなたが上記の念願を実現することを助けられるのです。IT-Passports.com EMCのE20-610試験トレーニング資料は豊富な経験を持っているIT専門家が研究したもので、問題と解答が緊密に結んでいますから、比べるものがないです。高い価格のトレーニング授業を受けることはなくて、IT-Passports.com EMCのE20-610試験トレーニング資料をショッピングカートに入れる限り、我々はあなたが気楽に試験に合格することを助けられます。

試験番号:E20-610 学習資料
試験科目:CLARiiON
問題と解答:全84問

>>詳しい紹介はこちら

試験番号:E20-880 試験問題集
試験科目:VNX Solutions Expert Exam for Technology Architects
問題と解答:全128問

>>詳しい紹介はこちら

試験番号:E20-322 最新な問題集
試験科目:Technology Architect Solutions Design
問題と解答:全568問

>>詳しい紹介はこちら

EMCのE20-322認証試験はIT業界にとても重要な地位があることがみんなが、たやすくその証本をとることはではありません。いまの市場にとてもよい問題集が探すことは難しいです。IT-Passports.comは認定で優秀なIT資料のウエブサイトで、ここでEMC E20-322認定試験の先輩の経験と暦年の試験の材料を見つけることができるとともに部分の最新の試験の題目と詳しい回答を無料にダウンロードこともできますよ。

ここで説明したいのはIT-Passports.comにあるコアバリューです。全てのEMCのE20-610試験は非常に大切ですが、この情報技術が急速に発展している時代に、IT-Passports.comはただその中の一つだけです。ではなぜほとんどの人々はIT-Passports.comを選んだのですか。それはIT-Passports.comが提供する問題資料は絶対あなたが試験に受かることを助けられるからです。IT-Passports.comが提供する資料は最新のトレーニングツールが常にアップデートして認証試験の目標を変換するの結果です。IT-Passports.com はあなたに最新の試験研究資料を提供しますから、IT-Passports.com EMCのE20-610問題集を持っていたら、試験に直面する自信に満ちることができ、合格しないなんて全然心配することはなく気楽に試験に受かることができます。

弊社のEMCのE20-610勉強資料を利用したら、きっと試験を受けるための時間とお金を節約できます。IT-Passports.comのEMCのE20-610問題集を買う前に、一部の問題と解答を無料にダウンロードすることができます。PDFのバージョンとソフトウェアのバージョンがありますから、ソフトウェアのバージョンを必要としたら、弊社のカスタマーサービススタッフから取得してください。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/E20-322.html

NO.1 A SQL Server implementation has been experiencing poor I/O performance. You are asked to identify
the root cause of the performance issues.
Which tool should you use for your analysis?
A.SQL Server Profiler
B.SQL Server Configuration Manager
C.SQL Query Editor
D.SQL Server VDI
Answer:A

EMC   E20-322 難易度   E20-322 種類   E20-322 日記   E20-322 対策

NO.2 A customer is implementing a new DMX-4 system in their data center. They have decided to use
Enterprise Flash Drive (EFD) technology in their design for their critical Oracle database.
Which database objects would gain the least benefit from EFDs?
A.High transaction rate table/index
B.Lookup tables
C.Index
D.Redo logs
Answer:D

EMC   E20-322 虎の巻   E20-322 科目

NO.3 Your customer is experiencing performance issues with three CLARiiON-attached hosts and you've
already ruled out server hardware and network latency as possible causes. All of these hosts' LUNs are
part of the same RAID group, so you now need to determine which host's LUNs are causing the RAID
group's performance degradation.
Which Navisphere Analyzer data view would help you determine which LUNs are having the greatest
effect on the disks' performance?
A.Performance Detail line chart
B.LUN Performance Survey chart
C.I/O Distribution Size Detail chart
D.LUN I/O Disk Detail chart
Answer:D

EMC 合格率   E20-322 関節   E20-322 模擬   E20-322 書籍

NO.4 Which product delivers simple automation to enable end-to-end virtual-to-physical mapping of physical
storage and servers, as well as ESX servers and the virtual machines that reside on them?
A.Navisphere Manager
B.Navisphere Analyzer
C.VMware Server
D.vCenter Server
Answer:A

EMC 過去   E20-322   E20-322   E20-322   E20-322 教育

NO.5 A business is planning to migrate a physical, Oracle 11g database environment to a virtualized VMAX
platform.
What would be the primary benefit to the business if such a migration were implemented?
A.Migrating to new servers or new storage devices would enable the business to maintain 100% uptime.
B.Virtualization would enable multiple Oracle database environments to run under one instance.
C.VMAX configurations would provide auto back-end load balancing configurations for Oracle dbf files.
D.Virtualization on VMAX storage would automatically lay out database objects.
Answer:A

EMC   E20-322   E20-322 教科書   E20-322 クラムメディア

NO.6 A request has been made to collect the information that has been gathered by SAN Advisor. You notice
the data has not been collected.
In order for SAN Advisor to receive information about the environment, what service is used?
A.EMC Ionix ControlCenter Repository
B.EMC Ionix ControlCenter Server
C.EMC Ionix ControlCenter StorageScope Repository
D.EMC Ionix ControlCenter ECCAPI
Answer:D

EMC 内容   E20-322 攻略   E20-322 模擬   E20-322 ふりーく

NO.7 A customer wants to implement one EMC Disk Library at their primary data center and one EMC Disk
Library at their disaster recovery site. They will be using IBM Tivoli Storage Manager (TSM) as the backup
application. A small subset of the primary data needs to be transferred to a disaster recovery site where it
will eventually expire without TSM involvement.
What is a recommended feature to use with EMC Disk Library to transfer data to the disaster recovery
site?
A.Remote Copy
B.RecoverPoint
C.Active Engine Failover
D.Virtual Tape Migration
Answer:A

EMC   E20-322 模擬   E20-322 試験   E20-322 認定試験

NO.8 A customer is looking for a best practice for a mission-critical Oracle application. They require a
point-in-time copy of their database for reporting in their Symmetrix environment. This point-in-time
environment must have no impact on production.
Which configuration would you recommend?
A.Synchronous R1 to R2; point-in-time clone off the R1s
B.Point-in-time clone off R1s, activated and mounted at the target
C.synchronous R1 to R2; point-in-time snap off the R1s
D.ynchronous R1 to R2; point-in-time clone off the R2s
Answer:D

EMC   E20-322 スクール   E20-322 認定資格   E20-322 認定

E22-192 参考書勉強、E20-385 復習資料、E20-822 全真問題集

「今の生活と仕事は我慢できない。他の仕事をやってみたい。」このような考えがありますか。しかし、どのようにより良い仕事を行うことができますか。ITが好きですか。ITを通して自分の実力を証明したいのですか。IT業界に従事したいなら、IT認定試験を受験して認証資格を取得することは必要になります。あなたが今しなければならないのは、広く認識された価値があるIT認定試験を受けることです。そうすれば、新たなキャリアへの扉を開くことができます。EMCのE22-192認定試験というと、きっとわかっているでしょう。この資格を取得したら、新しい仕事を探す時、あなたが大きなヘルプを得ることができます。何ですか。自信を持っていないからE22-192試験を受けるのは無理ですか。それは問題ではないですよ。あなたはIT-Passports.comのE22-192問題集を利用することができますから。

IT-Passports.comは100%の合格率を保証するだけでなく、1年間の無料なオンラインの更新を提供しております。最新の資源と最新の動態が第一時間にお客様に知らせいたします。何の問題があったらお気軽に聞いてください。

もう既にEMCのE20-822認定試験を申し込みましたか。「もうすぐ試験の時間なのに、まだ試験に合格する自信を持っていないですが、どうしたらいいでしょうか。何か試験に合格するショートカットがあるのですか。試験参考書を読み終わる時間も足りないですから・・・」いまこのような気持ちがありますか。そうしても焦らないでくださいよ。試験を目前に控えても、ちゃんと試験に準備するチャンスもあります。何のチャンスですかと聞きたいでしょう。それはIT-Passports.comのE20-822問題集です。これは効果的な資料で、あなたを短時間で試験に十分に準備させることができます。この問題集の的中率がとても高いですから、問題集に出るすべての問題と回答を覚える限り、E20-822認定試験に合格することができます。

IT-Passports.comは多くの人に便利を与えるとともに、多くの人の夢が実現させるサイトでございます。もし君はまだIT試験で心配すれば、私達IT-Passports.comの問題集を選んでください。IT-Passports.comは長年の研究をわたって研ITの認証試験に関する品質が高く、範囲は広い教育資料が開発しました。それは確かに君の試験に役に立つとみられます。

試験番号:E22-192 参考書勉強
試験科目:Captiva Installation, Configuration, and Management Exam
問題と解答:全106問

>>詳しい紹介はこちら

試験番号:E20-385 資格認定
試験科目:E20-385 Data Domain Specialist Exam for Implementation Engineers
問題と解答:全116問

>>詳しい紹介はこちら

試験番号:E20-822 参考書勉強
試験科目:CLARiiON Solutions Expert Exam for Storage Administrators
問題と解答:全120問

>>詳しい紹介はこちら

IT-Passports.comは優れたIT情報のソースを提供するサイトです。IT-Passports.comで、あなたの試験のためのテクニックと勉強資料を見つけることができます。IT-Passports.comのEMCのE22-192試験トレーニング資料は豊富な知識と経験を持っているIT専門家に研究された成果で、正確度がとても高いです。IT-Passports.comに会ったら、最高のトレーニング資料を見つけました。IT-Passports.comのEMCのE22-192試験トレーニング資料を持っていたら、試験に対する充分の準備がありますから、安心に利用したください。

EMCのE22-192認証試験の合格証は多くのIT者になる夢を持つ方がとりたいです。でも、その試験はITの専門知識と経験が必要なので、合格するために一般的にも大量の時間とエネルギーをかからなければならなくて、助簡単ではありません。IT-Passports.comは素早く君のEMC試験に関する知識を補充できて、君の時間とエネルギーが節約させるウェブサイトでございます。IT-Passports.comのことに興味があったらネットで提供した部分資料をダウンロードしてください。

E22-192認定試験の準備をするために、IT-Passports.com の専門家たちは彼らの豊富な知識と実践を生かして特別なトレーニング資料を研究しました。IT-Passports.com のEMCのE22-192問題集はあなたが楽に試験に受かることを助けます。IT-Passports.com のEMCのE22-192練習テストはE22-192試験問題と解答、 E22-192 問題集、E22-192 書籍やE22-192勉強ガイドに含まれています。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/E22-192.html

NO.1 A Developer needs to create a database query that will execute after the end user populates a field.
How can this be accomplished?
A. Configure a new log rule for the IndexPlus module to query the database.
B. Configure IndexPlus to make the database call.
C. Code a database query in IPP code's IndexPlus Finish event
D. Code a database query using Client-Side Scripting with IndexPlus
Answer: D

EMC 関節   E22-192 勉強法   E22-192

NO.2 A Developer modifies an IPP that was generated by CaptureFlow Designer.
Where can the IPP be maintained going forward?
A. CaptureFlow Designer
B. Dispatcher Manager
C. Process Developer
D. Free Form Designer
Answer: C

EMC 学校   E22-192 会場   E22-192 認定試験

NO.3 What is one virtualization product that is compatible with InputAccel?
A. VirtualBox
B. XenServer
C. Hyper-V
D. OracleVM
Answer: B

EMC   E22-192 体験   E22-192 受験記   E22-192 受験記

NO.4 An end user needs to export a batch from the InputAccel Server using a system that does not have
client modules installed.
Which mechanism can be used to export the batch to a different directory as a zip archived file?
A. IACopy
B. Multi-Directory Watch
C. File System Export
D. Administration Console
Answer: D

EMC 参考書   E22-192 教育   E22-192 学校

NO.5 What is required to synchronize the InputAccel Server to the InputAccel Database when moving the
database onto a new machine?
A. Reinstall ODBC Component
B. Reinstall InputAccel Server Component
C. Run Data Access Layer registration utility
D. Restart InputAccel service
Answer: C

EMC 試験   E22-192   E22-192 認定資格   E22-192 認定試験   E22-192 学校

NO.6 Which module enables end users to perform quality assurance on scanned images and document
assembly?
A. IndexPlus
B. Image Enhancement
C. RescanPlus
D. NuanceOCR
Answer: C

EMC 割引   E22-192   E22-192 ガイド

NO.7 Which module is used to automatically identify templates defined in a Dispatcher project?
A. Dispatcher manager
B. Classification Edit
C. Classification
D. Validation
Answer: C

EMC 練習問題   E22-192 合格率   E22-192 攻略   E22-192 問題集

NO.8 An Administrator reinstalls the InputAccel Server on new hardware after a disastrous hardware failure.
The Administrator uses the original CAF and LIC files from eighteen months ago to activate and license
the new server.
Why will this result in a non-functioning server?
A. The original CAF file contains invalid EnterBy dates
B. The original CAF file cannot be used on different hardware
C. The original LIC file cannot be used on different hardware
D. The original LIC file contains invalid EnterBy dates
Answer: B

EMC 問題集   E22-192   E22-192 方法   E22-192 体験

2014年4月17日星期四

最高なEMCのE20-385認定試験テストソフトウェア

IT業種で仕事している皆さんが現在最も受験したい認定試験はEMCの認定試験のようですね。広く認証されている認証試験として、EMCの試験はますます人気があるようになっています。その中で、E20-385認定試験が最も重要な一つです。この試験の認定資格はあなたが高い技能を身につけていることも証明できます。しかし、試験の大切さと同じ、この試験も非常に難しいです。試験に合格するのは少し大変ですが、心配しないでくださいよ。IT-Passports.comはE20-385認定試験に合格することを助けてあげますから。

EMCのE20-385認証試験はIT業界にとても重要な地位があることがみんなが、たやすくその証本をとることはではありません。いまの市場にとてもよい問題集が探すことは難しいです。IT-Passports.comは認定で優秀なIT資料のウエブサイトで、ここでEMC E20-385認定試験の先輩の経験と暦年の試験の材料を見つけることができるとともに部分の最新の試験の題目と詳しい回答を無料にダウンロードこともできますよ。

IT-Passports.comのE20-385問題集はあなたを楽に試験の準備をやらせます。それに、もし最初で試験を受ける場合、試験のソフトウェアのバージョンを使用することができます。これは完全に実際の試験雰囲気とフォーマットをシミュレートするソフトウェアですから。このソフトで、あなたは事前に実際の試験を感じることができます。そうすれば、実際のE20-385試験を受けるときに緊張をすることはないです。ですから、心のリラックスした状態で試験に出る問題を対応することができ、あなたの正常なレベルをプレイすることもできます。

試験番号:E20-385問題集
試験科目:EMC 「E20-385 Data Domain Specialist Exam for Implementation Engineers」
問題と解答:全116問

それぞれのIT認証試験を受ける受験生の身近な利益が保障できるために、IT-Passports.comは受験生のために特別に作成されたEMCのE20-385試験トレーニング資料を提供します。この資料はIT-Passports.comのIT専門家たちに特別に研究されたものです。彼らの成果はあなたが試験に合格することを助けるだけでなく、あなたにもっと美しい明日を与えることもできます。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/E20-385.html

NO.1 Which cabling path is used to connect an existing EMC Data Doman ES20 expansion shelf to a
new ES20 shelf?
A. Existing Expansion Shelf EXP'N port => New Expansion Shelf HOST port
B. Existing Expansion Shelf HOST port => New Expansion Shelf EXP'N port
C. Existing Expansion Shelf HOST port => New Expansion Shelf HOST port
D. Existing Expansion Shelf EXP'N port => New Expansion Shelf EXP'N port
Answer: A

EMC認定証   E20-385   E20-385認定試験   E20-385   E20-385認定資格

NO.2 You have implemented an EMC Data Domain system with directory replication. After
replication has occurred, the customer notices that the space utilization on the source and
destination systems is different. How can this be explained?
A.Difference in global compression
B. Difference in the encryption algorithm
C. CIFS/NFS is mixed on the same directory
D. Destination directory may be corrupted
Answer: A

EMC   E20-385   E20-385   E20-385

NO.3 An organization currently writes backups to an EMC Data Domain system and then creates
encrypted copies of their backups on tapes. These tapes are then shipped to a third-party offsite
vault.They are now planning to deploy a second Data Domain system in a hosted disaster recovery
site as a replication target. This will replace the use of the offsite tapes. The two sites are connected
through an encrypted WAN link. Where should encryption be applied on the Data Domain systems
to ensure a similar level of data security as their current process?
A.Use encryption of data in flight to the hosted disaster recovery site
B.Enable encryption of data at rest at the disaster recovery site
C.Enable encryption of data at rest at the source site
D. WAN link between the sites is already encrypted
Answer: B

EMC   E20-385   E20-385過去問   E20-385

NO.4 An organization currently writes backups to an EMC Data Domain system and then creates
encrypted copies of their backups on tapes. These tapes are then shipped to a third-party offsite
vault.
They are now planning to deploy a second Data Domain system to a secure data center at their
corporate headquarters as a replication target to replace the use of the offsite tapes. The two sites
are connected through the Internet. Where should encryption be applied on the Data Domain
systems to ensure a similar level of data security as achieved by their current process?
A. Encrypt the replication context
B. Encrypt the data at rest
C. Encrypt the data at rest and the replication context
D. Encryption is not required
Answer: A

EMC認定証   E20-385認定資格   E20-385   E20-385認定資格

NO.5 What is a component of the EMC Data Domain Data Invulnerability Architecture that protects
against data loss?
A.File system recoverability
B. Summary vector identification
C. System sanitization
D.Segment locality processing
Answer: A

EMC認定資格   E20-385   E20-385認定試験

NO.6 What is indicated by a flashing green SAS state LED on an EMC Data Domain ES20 SAS
controller?
A.Connection problem
B.Connection established
C. RAID reconstruction in progress
D.Connection in process
Answer: D

EMC   E20-385   E20-385

NO.7 Which method of deduplication yields better deduplication results for multiple data types?
A. Variable segment size deduplication due to its ability to add data to a variable segment and move
the data stream.
B. Fixed segment size deduplication due to its ability to add data to a fixed segment without having
to move the data stream.
C. Fixed segment size deduplication due to its ability to add data to a fixed segment and move the
data stream.
D. Variable segment size deduplication due to its ability to add data to a variable segment without
having to move the data stream.
Answer: D,A

EMC   E20-385認定試験   E20-385   E20-385

NO.8 You are implementing an EMC Data Domain system at a location that is not staffed.
However, the customer has network connectivity to the site from the main data center.
In the event of a system crash, what can be configured to allow the customer the ability
to cycle power?
A. Serial over LAN
B. SNMP
C. IPMI
D. Replication
Answer: C

EMC   E20-385   E20-385練習問題   E20-385   E20-385問題集   E20-385

NO.9 A customer is interested in deploying DD Boost for their current EMC Data Domain system.
They are aware of Distributed Segment Processing (DSP) and want to know the data flow when they
enable DSP . What describes the data flow from the backup host to the Data Domain system?
A. Segmenting, fingerprinting, and compression occur on the backup host. Fingerprint filtering and
writes occur on the Data Domain.
B. Segmenting, fingerprinting, and fingerprint filtering occur on the backup host. Compression and
writes occur on the Data Domain.
C. Fingerprinting, compression, and fingerprint filtering occur on the backup host. Segmenting and
writes occur on the Data Domain.
D. Segmenting, fingerprinting, fingerprint filtering, and compression occur on the backup host.
Writes occur on the Data Domain.
Answer: A

EMC   E20-385参考書   E20-385

NO.10 When connecting EMC Data Domain expansion shelves, what should be done to avoid cable
stress at the solder joints of the connector?
A. Keep the ambient temperature at an acceptable level
B. Use screw lock assemblies
C. Leave enough cable to allow for free air flow
D. Secure the cable to the rack door
Answer: B

EMC練習問題   E20-385認定証   E20-385   E20-385   E20-385

IT-Passports.comはきみの貴重な時間を節約するだけでなく、 安心で順調に試験に合格するのを保証します。IT-Passports.comは専門のIT業界での評判が高くて、あなたがインターネットでIT-Passports.comの部分のEMC E20-385資料を無料でダウンロードして、弊社の正確率を確認してください。弊社の商品が好きなのは弊社のたのしいです。

2014年4月1日星期二

最新のEMC E20-520試験の問題集

最近のわずかの数年間で、EMCのE20-520認定試験は日常生活でますます大きな影響をもたらすようになりました。将来の重要な問題はどうやって一回で効果的にEMCのE20-520認定試験に合格するかのことになります。この質問を解決したいのなら、IT-Passports.comのEMCのE20-520試験トレーニング資料を利用すればいいです。この資料を手に入れたら、一回で試験に合格することができるようになりますから、あなたはまだ何を持っているのですか。速くIT-Passports.comのEMCのE20-520試験トレーニング資料を買いに行きましょう。

IT 職員のそれぞれは昇進または高給のために頑張っています。これも現代社会が圧力に満ちている一つの反映です。そのためにEMCのE20-520認定試験に受かる必要があります。適当なトレーニング資料を選んだらこの試験はそんなに難しくなくなります。IT-Passports.comのEMCのE20-520試験トレーニング資料は最高のトレーニング資料で、あなたの全てのニーズを満たすことができますから、速く行動しましょう。

試験番号:E20-520問題集
試験科目:EMC 「Calriion solutions specialist exam」
問題と解答:全520問

IT-Passports.comはあなたに素晴らしい資料を提供するだけでなく、良いサービスも提供してあげます。IT-Passports.comの試験E20-520問題集を購入したら、IT-Passports.comは無料で一年間のアップデートを提供します。すると、あなたがいつでも最新のE20-520試験情報を持つことができます。それに、万一の場合、問題集を利用してからやはり試験に失敗すれば、IT-Passports.comは全額返金のことを約束します。こうすれば、まだ何を心配しているのですか。心配する必要がないでしょう。IT-Passports.comは自分の資料に十分な自信を持っていますから、あなたもIT-Passports.comを信じたほうがいいです。あなたのE20-520試験の成功のために、IT-Passports.comをミスしないでください。IT-Passports.comをミスすれば、あなたが成功するチャンスを見逃したということになります。

IT-Passports.comのEMCのE20-520試験トレーニング資料はあなたがリスクフリー購入することを保証します。購入する前に、あなたはIT-Passports.comが提供した無料な一部の問題と解答をダウンロードして使ってみることができます。IT-Passports.comの問題集の高品質とウェブのインタ—フェ—スが優しいことを見せます。それに、我々は一年間の無料更新サービスを提供します。失敗しましたら、当社は全額で返金して、あなたの利益を保障します。IT-Passports.comが提供した資料は実用性が高くて、絶対あなたに向いています。

現状に自己満足して、自分の小さな持ち場を守って少ない給料をもらって解雇されるのを待っている人がいないです。こんな生活はとてもつまらないですから。あなたの人生をよりカラフルにしたいのですか。ここで成功へのショートカットを教えてあげます。即ちEMCのE20-520認定試験に受かることです。この認証を持っていたら、あなたは、高レベルのホワイトカラーの生活を送ることができます。実力を持っている人になって、他の人に尊敬されることもできます。IT-Passports.comはEMCのE20-520試験トレーニング資料を提供できます。IT-Passports.comを利用したら、あなたは美しい夢を実現することができます。さあ、ためらわずにIT-Passports.comのEMCのE20-520試験トレーニング資料をショッピングカートに入れましょう。

EMCのE20-520認定試験を受験すれば、IT-Passports.comのE20-520問題集はあなたが試験の準備をするときに最も選択すべきツールです。この問題集はあなたが楽に試験に合格することを保証します。しかも、これは高く評判されている資料ですから、この問題集を持っていると、もうこれ以上E20-520試験を心配する必要がなくなります。この問題集はあなたが試験に準備するときに会う可能性があるすべての難問を解決してあげますから。IT-Passports.comのE20-520問題集を購入する前に、問題集の無料なサンプルをダウンロードして試用してもいいです。そうすると、問題集があなたに向いているかどうかを自分で判断することができます。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/E20-520.html

NO.1 A customer starts four SnapView sessions on a source LUN. The sessions are scheduled to start at
8:00 A.M., 12:00 P.M., 4:00 P.M., and 8:00 P.M. At 5:15 P.M. the reserved LUN pool runs out of
space.What will happen next?
A.Most recently allocated reserved LUN will be released.
B.Reserved LUN allocated first will be released.
C.Space used by all sessions on the source LUN will be released.
D.Space used by the session that performed the most recent write will be released.
Answer:D

EMC過去問   E20-520   E20-520問題集   E20-520過去問   E20-520認定証   E20-520認定試験

NO.2 A customer intends to use clones in their environment. They are concerned about the usability of clone
data.They ask about the result of removing a clone from a clone group.Which statement describes the
result of that operation?
A.Clone LUN may be used for reverse-synchronization operations.
B.Clone LUN may be used for synchronization operations.
C.Data on the clone LUN is flagged in the clone private LUN.
D.Data on the clone LUN is not affected and may be used by a host.
Answer:D

EMC練習問題   E20-520認定証   E20-520   E20-520

NO.3 During normal MirrorView/S operations, Navisphere Manager permits host access to how many
secondary images?
A.0
B.1
C.2
D.4
Answer:A

EMC   E20-520   E20-520

NO.4 The primary image of a MirrorView/S mirror set has trespassed from SPA to SPB on the primary
array.Which SP now owns the secondary image?
A.ALUA determines ownership
B.SPA on the secondary array
C.Neither SPA or SPB
D.SPB on the secondary array
Answer:D

EMC過去問   E20-520練習問題   E20-520   E20-520認定試験   E20-520

NO.5 What does the fracture log allow?
A.Incremental resynchronization of data
B.Creation of markers for each modified track
C.Capture of persistency errors from the source to target
D.Connectivity failures from both directions
Answer:A

EMC認定資格   E20-520問題集   E20-520練習問題

NO.6 Which best describes the MirrorView/A replication process?
A.A write is received, tracked in the SAN Copy delta set mechanism, transmitted to the secondary array.
B.A write is received, tracked in the fracture log, transmitted to the secondary array.
C.A write is received, tracked in the SnapView private LUN, transmitted to the secondary array.
D.A write is received, tracked in the write intent log, transmitted to the secondary array.
Answer:A

EMC   E20-520問題集   E20-520   E20-520認定試験

NO.7 A storage administrator tries to create a clone group on a CLARiiON CX4 and receives an error
message that stops the clone group from being created.What could be a possible cause?
A.MirrorView has not been configured.
B.Population latency has not been configured.
C.No CPLs have been allocated.
D.No reserved LUNs have been allocated.
Answer:C

EMC   E20-520   E20-520

NO.8 A storage administrator wants to use a point-in-time copy of a production LUN for testing and possibly
keep any changed data from that copy. The administrator's goal is to minimize the performance impact on
the production LUN as well as use the point-in-time copy for restoring their data.What is the extent size for
this LUN?
A.Use a clone and promote it as needed
B.Use a clone and reverse-synchronize as needed
C.Use a snapshot of a clone and roll back as needed
D.Use a snapshot and deactivate command to make changes permanent on the production LUN
Answer:B

EMC参考書   E20-520   E20-520問題集

NO.9 Which statement applies when the Protected Restore option is enabled on a clone?
A.Once the reverse synchronization is complete, the clone is fractured.
B.All SnapView sessions on the source LUN must be stopped.
C.A clone cannot be marked "dirty" before starting a reverse synchronization.
D.When reverse synchronization is in process, no writes are allowed to the source LUN or clone.
Answer:A

EMC問題集   E20-520   E20-520認証試験   E20-520   E20-520練習問題

NO.10 If a customer wants to present a secondary image LUN of a MirrorView/S mirror set to a host, what
must they do first?
A.The primary image must be removed from the mirror set.
B.The secondary image must be placed in the host storage group.
C.The secondary image must be removed from the mirror set or the secondary image promoted to a
primary image.
D.The secondary image must be fractured from the mirror set or the secondary image promoted to a
primary image.
Answer:C

EMC   E20-520   E20-520認定証   E20-520

NO.11 What CLARiiON is needed to meet a customer's requirement for their MirrorView/S environment that
will have 50 consistency groups?
A.CX4, FLARE 22
B.CX4, FLARE 28
C.CX3, FLARE 26
D.CX3, FLARE 28
Answer:B

EMC   E20-520   E20-520   E20-520   E20-520   E20-520認定証

NO.12 The number and size of SnapView pointers have reached memory allocation. What will take place to
adjust to this situation?
A.Pointers will be paged to the reserved LUN as required.
B.128 KB memory chunks will be added until the memory usage has been satisfied.
C.Pointers will be paged to and from the reserved LUN as required in 512 KB chunks.
D.An additional reserve LUN will be required.
Answer:C

EMC認定資格   E20-520   E20-520   E20-520   E20-520

NO.13 Should a SnapView session stop automatically, what will happen to the running sessions?
A.All sessions pointing to the clone will fail over to SP B and continue to write.
B.All sessions running on the source LUN will be terminated.
C.Host buffers will be flushed and sessions restarted.
D.All memory mapping entries will be saved to the COFW log.
Answer:A

EMC   E20-520   E20-520過去問   E20-520問題集   E20-520

NO.14 What happens when a snapshot is deactivated?
A.The snapshot becomes inaccessible to the primary host.
B.The SnapView session ends.
C.The snapshot becomes inaccessible to the secondary host.
D.All metadata is removed from the SP.
Answer:C

EMC   E20-520   E20-520参考書   E20-520認定証

NO.15 What makes sizing of the reserved LUN pool a non-trivial task?
A.Reserved LUNs are assigned to specific source LUNs when the CLARiiON is laid out.
B.Source LUNs can be different sizes and only write to LUNs of the same size.
C.Reserved LUN pools may be different sizes and allocation to source LUNs is based on the next
available reserved LUN.
D.There are 512 reserved LUNs in all CLARiiON models while there may be many more source LUNs.
Answer:C

EMC過去問   E20-520   E20-520   E20-520過去問

NO.16 Which device is enabled by default when creating a mirror set in a MirrorView/S environment on a
CX4-120 with FLARE 28?
A.Write intent log
B.Reserved LUN pool
C.Secondary Image
D.Clone private LUN
Answer:B

EMC   E20-520   E20-520

NO.17 Which statement describes the operation of the reserved LUN pool?
A.LUN IDs of reserved LUNs in the reserved LUN pool can only be between 2048 and 4096.
B.All reserved LUNs must be the same size, on FC disks, and have the same RAID type.
C.Separate reserved LUN pools are required for SnapView, Incremental SAN Copy, and MirrorView/A.
D.Reserved LUN pool is shared between SnapView, Incremental SAN Copy, and MirrorView/A.
Answer:D

EMC   E20-520参考書   E20-520   E20-520問題集

NO.18 In a MirrorView/S environment, a primary image is owned by SPA on the primary array. Which SP must
own the secondary image on the secondary array within the same mirror set?
A.Either SP on the secondary array
B.SPB on the secondary array
C.SPA on the secondary array
D.It is marked as a private LUN on the secondary array
Answer:C

EMC練習問題   E20-520   E20-520   E20-520

NO.19 Which object would maintain the changes to a source LUN in the event a MirrorView/S configuration
suffered a link outage followed by an SP trespass?
A.Metavolume
B.Fracture log
C.Write intent log
D.Clone private LUN
Answer:C

EMC過去問   E20-520   E20-520   E20-520

NO.20 What is the process for flagging source LUNs?
A.Snapshots are created, changing the LUN's state.
B.Via GUI interface or CLI the state change bit is switched.
C.The PSM LUN is set to "source."
D.Via Navisphere Analyzer the FLARE LUN is changed to a PSM LUN.
Answer:A

EMC   E20-520認定証   E20-520認定試験   E20-520練習問題

EMCのE20-520認定試験と言ったら、人々は迷っています。異なる考えがありますが、要約は試験が大変難しいことです。EMCのE20-520認定試験は確かに難しい試験ですが、IT-Passports.com を選んだら、これは大丈夫です。IT-Passports.comのEMCのE20-520試験トレーニング資料は受験生としてのあなたが欠くことができない資料です。それは受験生のために特別に作成したものですから、100パーセントの合格率を保証します。信じないになら、IT-Passports.comのサイトをクリックしてください。購入する人々が大変多いですから、あなたもミスしないで速くショッピングカートに入れましょう。

EMC E20-538認定試験の資格を入手したいのか

弊社は強力な教師チームがあって、彼たちは正確ではやくて例年のEMC E20-538認定試験の資料を整理して、直ちにもっとも最新の資料を集めて、弊社は全会一緻で認められています。EMC E20-538試験認証に合格確率はとても小さいですが、IT-Passports.comはその合格確率を高めることが信じてくだい。

E20-538問題集の品質を確かめ、この問題集はあなたに合うかどうかを確認することができるように、IT-Passports.comはE20-538問題集の一部のダウンロードを無料で提供します。二つのバージョンのどちらでもダウンロードできますから、IT-Passports.comのサイトで検索してダウンロードすることができます。体験してから購入するかどうかを決めてください。そうすると、E20-538問題集の品質を知らないままに問題集を購入してから後悔になることを避けることができます。

試験番号:E20-538問題集
試験科目:EMC 「Network Attached Storage (NAS) Specialist Exam for Storage Administrators」
問題と解答:全115問

IT-Passports.comのE20-538問題集には、PDF版およびソフトウェア版のバージョンがあります。それはあなたに最大の利便性を与えることができます。いつでもどこでも問題を学ぶことができるために、あなたはPDF版の問題集をダウンロードしてプリントアウトすることができます。そして、ソフトウェア版のE20-538問題集は実際試験の雰囲気を感じさせることができます。そうすると、受験するとき、あなたは試験を容易に対処することができます。

IT-Passports.comのEMCのE20-538試験トレーニング資料はPDFぼ形式とソフトウェアの形式で提供して、IT-Passports.comのEMCのE20-538試験問題と解答に含まれています。E20-538認定試験の真実の問題に会うかもしれません。そんな問題はパーフェクトと称するに足って、効果的な方法がありますから、どちらのEMCのE20-538試験に成功を取ることができます。IT-Passports.comのEMCのE20-538問題集は総合的にすべてのシラバスと複雑な問題をカバーしています。IT-Passports.comのEMCのE20-538テストの問題と解答は本物の試験の挑戦で、あなたのいつもの考え方を変換しなければなりません。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/E20-538.html

NO.1 A site administrator would like to have file system quota implemented. However, the administrator is
worried about users who create symbolic links.
How can symbolic links be excluded from the file system quota?
A. Use group and user quotas together
B. Use the filesize policy
C. Use the block policy
D. Use the excl option when configuring the quota
Answer: B

EMC   E20-538問題集   E20-538   E20-538   E20-538問題集   E20-538認定試験

NO.2 Which command would successfully extend a Data Mover root file system?
A. as root issue /nas/sbin/rootnas_fs -xtend root_fs_2 size=2G pool=clar_r5_performance
B. as nasadmin issue nas_fs -xtend root_fs_2 size=2G pool=clar_r5_performance
C. as root issue /nas/sbin/rootnas_fs -xtend root_fs_2 size=2K pool=clar_r5_performance
D. as nasadmin issue nas_fs -xtend root_fs_2 size=2G pool=clar_r5_performance
Answer: A

EMC問題集   E20-538   E20-538参考書

NO.3 A network administrator needs to create a trunk on a Data Mover from dissimilar physical network
devices.
What networking configuration should be used to accomplish this?
A. LACP
B. Fail Safe Network
C. EtherChannel
D. SNMP
Answer: C

EMC過去問   E20-538問題集   E20-538

NO.4 Management asks you to set quota limits on a directory tree.
They want the default set to 500 MB with a possible overhead of 20%. They want to enforce these limits
on the sum of the logical size of objects in that quota tree. What is part of the correct answer?
A. Set the hard limit to 600 MB, and set the file size quota policy on the Data Mover.
B. Set the hard limit to 600 MB, and set the file size quota policy on the file system.
C. Set the hard limit to 500 MB, and set the file size quota policy on the file system.
D. Set the hard limit to 500 MB, and set the blocksize quota policy.
Answer: A

EMC   E20-538参考書   E20-538

NO.5 You are creating an auto-extend file system. What would happen if you leave the Maximum Capacity
option empty?
A. File system would grow to the pool capacity limit.
B. Data would be overwritten.
C. File system would fail to auto-extend.
D. Write I/Os would be saved in cache until more space is added.
Answer: A

EMC過去問   E20-538   E20-538   E20-538

NO.6 An administrator configured Data Mover network devices to transmit frames on all links for redundancy.
Which network configuration was used to accomplish this.?
A. LACP
B. Proxy ARP
C. Ethernet channel
D. RARP
Answer: A

EMC   E20-538練習問題   E20-538参考書

NO.7 You enter the following command: nas_fs -create size=3M pool=clar_r5_economy
What will be the result?
A. The file system is created with a default file system name.
B. The file system and a mountpoint are created.
C. Only the mountpoint is created.
D. The file system is not created.
Answer: A

EMC認定試験   E20-538練習問題   E20-538   E20-538認定試験   E20-538認証試験

NO.8 You are running out of capacity on your Celerra, and additional storage is already on order. Meanwhile,
which quota configuration would track user consumption?
A. User quotas on the file system
B. Group quotas on the tree
C. Tree quotas on the file system
D. User quotas on the tree
Answer: A

EMC問題集   E20-538   E20-538

NO.9 What is a minimum requirement when creating a file system using Manual Volume Management?
A. Metavolume
B. Mirror volume
C. Sliced volumes
D. Striped volumes
Answer: A

EMC認定証   E20-538   E20-538問題集

NO.10 When a Celerra quota is turned off, how does that affect the existing user and group quota information?
A. User and group quota statistics are deleted.
B. Group statistics are retained and user statistics are not.
C. User and group statistics are retained.
D. User statistics are retained and group statistics are not.
Answer: C

EMC   E20-538認証試験   E20-538認定試験

NO.11 A system administrator is trying to create a non-root file system of type UxFS, on a metavolume. What is
the minimum size to create the file system?
A. 4 GB
B. 1 MB
C. 2 GB
D. 2 MB
Answer: D

EMC参考書   E20-538認定試験   E20-538練習問題   E20-538   E20-538   E20-538認証試験

NO.12 A site administrator needs to disable user and group quotas. What happens to the existing quota
configuration and metadata?
A. Maintained
B. Enforced
C. Deleted
D. Reset
Answer: A

EMC   E20-538認定資格   E20-538過去問   E20-538過去問   E20-538

NO.13 Which statement describes the public network connection of a Celerra with a single Control Station?
A. Comprised of a single physical Ethernet connection
B. Is formed from dual redundant physical Ethernet connections
C. Comprised of a virtual Ethernet EtherChannel connection
D. Is formed from a virtual Ethernet LACP connection
Answer: A

EMC   E20-538認定資格   E20-538練習問題   E20-538

NO.14 You are asked by management to create a project directory and track the individual user consumption
in this directory using Celerra quota features. No limits should be enforced.
What would be part of an appropriate procedure to satisfy this requirement?
A. Set up a user quota on the share; specify the limits with the keyword "none" in the CLI
B. Set up a tree quota on the new directory; set up a user quota on the quota tree; specify the limits for the
tree quota and user quota with a value of zero in the GUI
C. Set up a tree quota on the new directory; leave the two fields specifying the limits for the quota tree and
the user quota blank in the Unisphere GUI
D. Set up a user quota on the file system (accommodating the new directory); specify the limits with the
keyword "none" in the GUI
Answer: C

EMC   E20-538認定試験   E20-538問題集   E20-538認定資格   E20-538

NO.15 Which conditions must be met before tree quotas can be enabled?
A. File system and parent directories must exist, but the parent directory on which the tree quota is to be
applied must already exist.
B. File system and parent directories must exist, but the parent directory on which the tree quota is to be
applied must not exist.
C. Tree directory structure to be quoted must be populated with data.
D. Tree directory structure to be quoted must be at the root of the file system.
Answer: B

EMC   E20-538参考書   E20-538   E20-538認定証

もしあなたはまだ合格のためにEMC E20-538に大量の貴重な時間とエネルギーをかかって一生懸命準備し、EMC E20-538認証試験に合格するの近道が分からなくって、今はIT-Passports.comが有効なEMC E20-538認定試験の合格の方法を提供して、君は半分の労力で倍の成果を取るの与えています。

信用のあるEMC E20-818認定試験の問題集

IT-Passports.comは初めて試験を受けるあなたが一回で試験に合格して、認証資格を取ることを保証します。IT-Passports.comが提供して差し上げたのは高品質のEMCのE20-818模擬問題集で、あなたがステップバイステップで試験に準備する手順を指導しています。IT-Passports.comのEMCのE20-818試験問題集は絶対あなたに成功をもたらすことを保証します。IT-Passports.comのEMCのE20-818認定試験に準備するために色々な方法がありますが、

IT-Passports.comのE20-818試験参考書は他のE20-818試験に関連するする参考書よりずっと良いです。これは試験の一発合格を保証できる問題集ですから。この問題集の高い合格率が多くの受験生たちに証明されたのです。IT-Passports.comのE20-818問題集は成功へのショートカットです。この問題集を利用したら、あなたは試験に準備する時間を節約することができるだけでなく、試験で楽に高い点数を取ることもできます。

「今の生活と仕事は我慢できない。他の仕事をやってみたい。」このような考えがありますか。しかし、どのようにより良い仕事を行うことができますか。ITが好きですか。ITを通して自分の実力を証明したいのですか。IT業界に従事したいなら、IT認定試験を受験して認証資格を取得することは必要になります。あなたが今しなければならないのは、広く認識された価値があるIT認定試験を受けることです。そうすれば、新たなキャリアへの扉を開くことができます。EMCのE20-818認定試験というと、きっとわかっているでしょう。この資格を取得したら、新しい仕事を探す時、あなたが大きなヘルプを得ることができます。何ですか。自信を持っていないからE20-818試験を受けるのは無理ですか。それは問題ではないですよ。あなたはIT-Passports.comのE20-818問題集を利用することができますから。

現在の社会の中で優秀な人材が揃てIT人材も多く、競争もとても大きくて、だから多くのIT者はにIT関する試験に参加するIT業界での地位のために奮闘しています。E20-818試験はEMCの一つ重要な認証試験で多くのIT専門スタッフが認証される重要な試験です。

IT-Passports.comはEMCのE20-818試験に向けて問題集を提供する専門できなサイトで、君の専門知識を向上させるだけでなく、一回に試験に合格するのを目標にして、君がいい仕事がさがせるのを一生懸命頑張ったウェブサイトでございます。

IT-Passports.comを選択したら、成功が遠くではありません。IT-Passports.comが提供するEMCのE20-818認証試験問題集が君の試験に合格させます。テストの時に有効なツルが必要でございます。

IT-Passports.comのEMCのE20-818試験トレーニング資料は全てのオンラインのトレーニング資料で一番よいものです。我々の知名度はとても高いです。これは受験生の皆さんが資料を利用した後の結果です。IT-Passports.comのEMCのE20-818試験トレーニング資料を選んだら、100パーセントの成功率を保証します。もし失敗だったら、我々は全額で返金します。受験生の皆さんの重要な利益が保障できるようにIT-Passports.comは絶対信頼できるものです。

試験番号:E20-818問題集
試験科目:EMC 「Symmetrix Solutions Expert Exam for Implementation Engineers」
問題と解答:全161問

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/E20-818.html

NO.1 Click the Calculator icon in the upper left-hand corner.
A customer is migrating their SQL server from a NAS back end to a new RAID 1-protected Symmetrix
V-Max SE array. Perfmon was used to create a log view of an average day's activity against the database
LUN as represented in the exhibit. Unfortunately the database's data file and transaction log are located
on the same LUN. The database administrator has informed you that this database typically processes 25
GB worth of transactions over the course of their 12-hour business day.
Which discount in IOPS should be taken before determining the number of spindles required for the data
file LUN?
A.75
B.152
C.176
D.365
Answer:A

EMC過去問   E20-818練習問題   E20-818認定資格   E20-818過去問   E20-818

NO.2 A customer wants to use TimeFinder/Exchange Integration Module (TF/EIM) to create daily local
replicas of a critical Microsoft Exchange 2007 mailbox server. Using Terminal Services, they connect
remotely to the backup server and execute the following command:
exbackup2007 -v -vss -s [servername\] -preestablish
The command runs up until the point where TF/EIM attempts to mount the volumes, then it fails. Why is
the process unable to complete?
A.Exbackup is not supported using a terminal session
B.Correct VSS Provider was not installed
C."copyonly" switch must be specified the first time a backup is run
D.Exbackup does not have the permissions needed to run on the backup host
Answer:A

EMC参考書   E20-818   E20-818認定証   E20-818認定証

NO.3 A customer is running Concurrent SRDF/Star. The disaster recovery (DR) plan allows for the workload
to be switched to either the synchronous site or the asynchronous site. In addition, part of their DR plan is
to enable SRDF/Star protection once the workload site comes back online.
Which advice should be given to the customer?
A.If production fails over to the synchronous site, it is possible to run in a Star-protected configuration after
the return of the original workload site.
B.If production fails over to either the asynchronous site or synchronous site, it is not possible to run in a
Star-protected configuration from either site after the return of the original workload site.
C.If production fails over to either the asynchronous site or synchronous site, it is possible to run in a
Star-protected configuration from either site after the return of the original workload site.
D.If production fails over to the asynchronous site, it is possible to run in a Star-protected configuration
after the return of the original workload site.
Answer:A

EMC認定試験   E20-818練習問題   E20-818   E20-818参考書

NO.4 A new Cascaded SRDF customer is running in SRDF/A mode from the source (R1) site to the
disk-based secondary (R21) site. In this scenario, which SRDF mode is permitted between the R21 and
the R2 sites?
A.Adaptive Copy Disk
B.Adaptive Copy Write Pending
C.Synchronous
D.Asynchronous
Answer:A

EMC   E20-818認定証   E20-818過去問   E20-818認定証

NO.5 A composite group spanning two Symmetrix arrays is set up to run SRDF/Star using Cascaded SRDF
as illustrated in the exhibit. What is one of the necessary conditions before the SRDF daemon at Site A
will perform an MSC cycle switch?
A.Transmit delta sets from Site B to Site C have finished
B.SDDF bitmaps have been swapped at Site A
C.Invalid track count between Sites A and C is less than 30000
D.SYMCLI_STAR_ALLOW_CASCADED_CONFIGURATION option must be enabled in the option file
Answer:A

EMC   E20-818練習問題   E20-818   E20-818過去問   E20-818認証試験   E20-818

NO.6 An Microsoft Exchange administrator has recently encountered an issue with one of the databases in
their Exchange 2007 environment. The decision was made to perform a partial restore of only the single
database.
Based on EMC and Microsoft best practice, what are the proper ordered steps needed to complete this
task?
A.1) Dismount all databases in the storage group. 2) Restore the database replica. 3) Remove the .chk
file from the system path folder. 4) Remount all databases in the storage group.
B.1) Remove the .chk file from the system path folder. 2) Dismount all databases in the storage group. 3)
Restore the database replica. 4) Remount all databases in the storage group.
C.1) Dismount all databases in the storage group. 2) Remove the .chk file from the system path folder. 3)
Restore the database replica. 4) Remount all databases in the storage group.
D.1) Dismount all databases in the storage group. 2) Remove the .chk file from the system path folder. 3)
Remount all databases in the storage group. 4) Restore the database replica.
Answer:A

EMC   E20-818認定試験   E20-818

NO.7 A customer wants to provide remote disaster recovery (DR) for several critical mailbox servers in their
Microsoft Exchange Server 2007 environment. Local recoverability is provided by creating replicas of their
critical databases.
The customer's DR site is located 20 km away. They have already provisioned the necessary failover host
on the DR site, as well as the required Active Directory infrastructure needed to support a failover.
However, they want to minimize the total number of database copies required to provide basic failover
capabilities for the Exchange server.
Which solution would you recommend to provide remote point-of-failure recovery with the fewest local
and remote database copies?
A.R1-R2-BCV
B.Mixed Mirroring
C.STD-R1BCV-R2-BRBCV
D.STD-R1BCV-R2
Answer:A

EMC   E20-818認定資格   E20-818参考書   E20-818練習問題   E20-818問題集

NO.8 Refer to the Exhibit.You have been asked to configure a Cascaded SRDF solution at a customer site.
The production site will be at Site A, the synchronous target will be at Site B, and the asynchronous target
at Site C.
Which kind of RDF devices will be needed at each site?
A.R1 at Site A, R21 at Site B, and R2 at Site C
B.R11 at Site A, R21 at Site B, and R22 at Site C
C.R11 at Site A, R21 at Site B, and R2 at Site C
D.R1 at Site A, R2 at Site B, and R21 at Site C
Answer:A

EMC   E20-818参考書   E20-818   E20-818認定試験

NO.9 A customer is migrating their Microsoft Exchange 2007 server from a NAS back end to a new
Symmetrix V-Max SE array. As illustrated in the exhibit, perfmon was used to create a log view of an
average day's activity against the database LUN of the busiest datastore in the Exchange environment.
This will serve as the performance benchmark for all other database LUNs. There are an additional four
mailbox databases on this server.
How many RAID 1-protected 15k rpm spindles are required to satisfy the performance needs of the
customer for all the mailbox databases on this server?
A.10
B.26
C.38
D.50
Answer:D

EMC認証試験   E20-818   E20-818認証試験

NO.10 A customer is planning an SRDF/Star configuration as shown in the exhibit. The customer wants to
switch production to the synchronous target in the event of a workload site fault.
In addition to the Base and SRDF Solutions Enabler licenses, which licenses are recommended at the
synchronous target?
A.TimeFinder/Clone and TimeFinder/CG
B.TimeFinder/Mirror and TimeFinder/Clone
C.TimeFinder/Snap and TimeFinder/CG
D.TimeFinder/Snap and TimeFinder/Mirror
Answer:A

EMC   E20-818認定試験   E20-818問題集   E20-818

NO.11 Group Name Services (GNS) is enabled in an SRDF/Star solution. What is a benefit of GNS in a
SRDF/Star environment?
A.Facilitates management of SRDF/Star when there are multiple management hosts at each location
B.Distributes the Star internal definition file to the Symmetrix arrays at both target locations
C.Propagates the composite group definitions over SRDF links
D.Restarts the SRDF daemon in the event it stops unexpectedly
Answer:A

EMC   E20-818   E20-818問題集

NO.12 In the event of a physical disk spindle failure, how would a customer with Microsoft SQL Server
maximize availability?
A.Logs should be on RAID 1 volumes with data volumes on separate RAID 6 volumes
B.Logs should be on RAID 1 volumes with data volumes on separate RAID 5 volumes
C.Logs and data files should be on separate RAID 5 volumes
D.Logs and data files should be on separate RAID 1-protected volumes
Answer:A

EMC   E20-818参考書   E20-818認証試験   E20-818

NO.13 A customer has three data centers that are used to run SRDF/AR multi-hop on Symmetrix DMX-4
arrays.
Production is located at Site A
Secondary site is located at Site B
Tertiary site is located at Site C
In the event of a Site A failure, the customer wants to be able to fail over to Site C while retaining the
ability to have remote data protection. Which solution will offer the best RPO and RTO for this customer?
A.Cascaded SRDF
B.Latest version of SRDF/AR
C.Concurrent SRDF
D.SRDF/EDP
Answer:A

EMC   E20-818認証試験   E20-818   E20-818   E20-818

NO.14 A customer has been creating replicas of several Microsoft Exchange mailbox servers using Replication
Manager. They have recently added a new Exchange Server 2007 mailbox host to the environment.
In addition, the customer has created a scheduled job to create replicas of five storage groups in
consecutive order. Since doing so, they notice that the newly added replica jobs seem to take a very long
time to complete.
What is the source of the problem?
A.NTFS volumes containing the databases were not formatted with the correct cluster size
B.Replication Manager job should have been configured to create the replicas simultaneously
C.Latest Replication Manager Client Service Pack was not installed on the Exchange server
D.Exchange management utilities were not installed on the Replication Manager mount host
Answer:A

EMC   E20-818   E20-818   E20-818   E20-818認定試験   E20-818認証試験

NO.15 A customer wants to use Replication Manager to replicate and mount, at the file group level, a Microsoft
SQL Server database. What must be done before creating a Replication Manager file group replication
job?
A.Ensure no other data files are on the same volume with the selected file group
B.Copy the log files along with the file group data files
C.Use the recover database option when mounting a file group
D.Create a TimeFinder device group that contains only the file group data files
Answer:A

EMC   E20-818問題集   E20-818参考書   E20-818参考書   E20-818練習問題

NO.16 As reflected in the exhibit, a customer has a Cascaded SRDF/Star environment. Site B fails and they
undertake a reconfiguration to provide remote data protection between Sites A and C.
What is used to determine the invalid tracks that must be moved from Site A to Site C?
A.Inclusive OR of two SDDF bitmaps at Site A
B.Inclusive OR of two SDDF bitmaps at Site A and a bitmap at Site C
C.Inclusive OR of two SDDF bitmaps at Site B
D.Inclusive OR of two SDDF bitmaps at Site C
Answer:A

EMC   E20-818認定資格   E20-818認定資格   E20-818練習問題   E20-818

NO.17 An SRDF/Star solution has been proposed. The customer is slow to accept the solution because they
are concerned about the reliability of the RDF daemon.
How would you address the customer's concern?
A.RDF daemons will be deployed on multiple management stations at the workload site. The RDF
daemons will cooperate with each other.
B.RDF daemon process runs on the Symmetrix array and has built-in redundancy.
C.RDF daemon process runs on the Symmetrix array. If the workload site RDF daemon fails, the RDF
daemon from one of the other sites will take over.
D.RDF daemons will be deployed on one management station at each of the three sites. If the workload
site RDF daemon fails, one of the RDF daemons from the other two sites will take over.
Answer:A

EMC認定資格   E20-818認定証   E20-818

NO.18 A Microsoft SQL Server database administrator wants to execute backups using Solutions Enabler SRM
functionality. Which ODBC variable(s) needs to be set to enable the symioctl and symrdb command set?
A.SYMCLI_RDB "CONNECT" and "TYPE" environment variables
B.SYMCLI_RDB "NAME" and "TYPE" environment variables
C.Only the SYMCLI_RDB "Connect" to the database "username/password"
D.Only the SYMCLI_RDB "TYPE" variable to "sqlserver"
Answer:A

EMC   E20-818   E20-818練習問題

NO.19 A customer has implemented Microsoft Exchange Server 2007 in an SRDF environment with replicas
being taken at the disaster recovery (DR) site. During testing of this solution, they have failed over
Exchange operations to the DR site. The Exchange mailbox server appears to come online, but user
mailboxes are inaccessible. The Exchange Management Console shows all mailboxes marked with a
small red "x" over the mailbox icons.
Which course of action will resolve this issue?
A.Ensure the Exchange mailbox server at the DR site can communicate with an Active Directory Domain
Controller
B.Recover the database from the BCV copies available at the DR site
C.Ensure that the World Wide Web service on the Exchange server at the DR site has started
successfully
D.Recover the database from the remote BCV copies available at the primary site
Answer:A

EMC認証試験   E20-818認定資格   E20-818   E20-818参考書   E20-818練習問題   E20-818

NO.20 A customer's SQL database has been experiencing performance degradation every time a particular
query is run. When designing the storage layout, all user databases were properly sized according to
EMC best practices.
Which storage configuration could be the source of the problem?
A.Tempdb and user databases are sharing spindles
B.MDF and LDF files are not sharing spindles
C.RAID 5 protection has been used for Tempdb
D.Data files are spread over striped metavolumes
Answer:A

EMC   E20-818   E20-818認定試験   E20-818練習問題

E20-818認定試験は現在で本当に人気がある試験ですね。まだこの試験の認定資格を取っていないあなたも試験を受ける予定があるのでしょうか。確かに、これは困難な試験です。しかし、難しいといっても、高い点数を取って楽に試験に合格できないというわけではないです。では、まだ試験に合格するショートカットがわからないあなたは、受験のテクニックを知りたいですか。今教えてあげますよ。それはIT-Passports.comのE20-818問題集を利用することです。

EMC EVP-100認定試験の受験法を教える

EMC認証試験に参加する方はIT-Passports.comの問題集を買ってください。成功を祈ります。

EMCのEVP-100認定試験を受けてEVP-100認証資格を取得したいですか。IT-Passports.comはあなたの成功を保証することができます。もちろん、試験の準備をするときに試験に関連する知識を学ぶのは必要です。なお大切なのは、自分に相応しい効率的なツールを選択することです。IT-Passports.comのEVP-100問題集はあなたに合う最善の勉強法です。この高品質の問題集は信じられないほどの結果を見せることができます。自分が試験に合格できない心配があれば、はやくIT-Passports.comのウェブサイトをクリックしてもっと多くの情報を読んでください。

IT-Passports.comのIT専門家たちは受験生の皆さんのニーズを満たすように彼らの豊富な知識と経験を活かして試験トレーニング資料の品質をずっと高めています。受験生の皆さんが一回でEMCのEVP-100試験に合格することを保証します。IT-Passports.comの製品を購入したら、あなたはいつでも最新かつ最正確な試験情報を得ることができます。IT-Passports.comの資料のカバー率が高くて、受験生に便宜を与えられます。それに、問題集の合格率が100パーセントに達するのですから、あなたは安心に試験を受けることができます。

試験番号:EVP-100問題集
試験科目:EMC 「2011 VSE Consolidate Product & Technology Test」
問題と解答:全133問

EMCのEVP-100試験にもっと首尾よく合格したいのですか。そうしたら速くIT-Passports.comを選びましょう。IT-Passports.comは様々なIT認証試験を受ける人々に正確な試験資料を提供するサイトです。IT-Passports.comはIT職員としてのあなたに昇進するチャンスを与えられます。IT-Passports.com が提供したEMCのEVP-100試験に関する一部の無料の問題と解答を利用してみることができます。そうすると、我々の信頼性をテストできます。

IT-Passports.comのEVP-100問題集の超低い価格に反して、 IT-Passports.comに提供される問題集は最高の品質を持っています。そして、もっと重要なのは、IT-Passports.comは質の高いサービスを提供します。望ましい問題集を支払うと、あなたはすぐにそれを得ることができます。IT-Passports.comのサイトはあなたが最も必要なもの、しかもあなたに最適な試験参考書を持っています。EVP-100問題集を購入してから、また一年間の無料更新サービスを得ることもできます。一年以内に、あなたが持っている資料を更新したい限り、IT-Passports.comは最新バージョンのEVP-100問題集を捧げます。IT-Passports.comはあなたに最大の利便性を与えるために全力を尽くしています。

今の競争の激しいIT業界では、多くの認定試験の合格証明書が君にをとんとん拍子に出世するのを助けることができます。多くの会社は君の実力と昇進がその証明書によって判断します。EMCのEVP-100認証試験はIT業界の中で含金度高い試験で、IT-Passports.comがEMCのEVP-100認証試験について対応性の訓練 を提供しておって、ネットで弊社が提供した部分の問題集をダウンロードしてください。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/EVP-100.html

NO.1 Which two (2) are key benefits of the VNX File Reduplication?
A. Reduced power costs
B. Improved application performance
C. Improved reliability of applications
D. Reduced reliance on short-term tape retention
E. Improved LAN and WAN performance
Answer: D,E

EMC認証試験   EVP-100   EVP-100認証試験   EVP-100練習問題   EVP-100認定証

NO.2 Which three (3) protocols will the VNXe array work with?
A. iSCSI (file emulated)
B. Fibre Channel
C. FTP/SFTP
D. CIFS
E. iSCSI (native block)
F. NFS
Answer: A,D,F

EMC   EVP-100   EVP-100   EVP-100

NO.3 Which VNX Array is Block Based only?
A. VNX5100
B. VNX5500
C. VNX5300
D. VNX5700
Answer: A

EMC   EVP-100   EVP-100

NO.4 What feature of the VNX allows the array to identify bottlenecks and hot-spots in the VNX storage
systems?
A. Data Compression
B. Unisphere Analyzer
C. FASTVP
D. FAST Cashe
Answer: B

EMC認定証   EVP-100   EVP-100問題集

NO.5 Zoning with World Wide Names is often referred to as what?
A. Host Zoning
B. Hard Zoning
C. WWNN Zoning
D. Soft Zoning
Answer: D

EMC練習問題   EVP-100認定試験   EVP-100参考書   EVP-100認定試験

NO.6 When comparing the different software suites for the VNX, which one provides for automated,
application aware replication, monitoring, notification, and reporting via Replication Manager and Data
Protection Advisor for Replication Analysis?
A. Remote Protection Suite
B. Security and Compliance Suite
C. Local Protection Suite
D. Application Protection Suite
Answer: D

EMC   EVP-100問題集   EVP-100認証試験   EVP-100

NO.7 The VNX Total Protection Pack consists of which of the software suites?
A. VNX Security and Compliance Suite
B. VNX Local Protection Suite
C. VNX Remote Protection Suite
D. VNX FAST Suite
E. VNX Application Protection Suite
Answer: B,C,E

EMC参考書   EVP-100練習問題   EVP-100過去問   EVP-100過去問   EVP-100参考書

NO.8 What feature of the VNX allows the array to free up space by eliminating redundant data?
A. Unisphere Analyzer
B. FASTVP
C. Data Compression
D. FAST Cashe
Answer: C

EMC   EVP-100認定試験   EVP-100練習問題   EVP-100過去問   EVP-100   EVP-100

NO.9 Which three (3) are considered software features of the VNXe?
A. integrated Data Protection
B. FibreChannel Connectivity
C. Active/active ease of use
D. Simplified Management
E. Unified IP based protocols
F. Aggregated Summary Capacity View
Answer: A,D,E

EMC認定資格   EVP-100   EVP-100   EVP-100

NO.10 What feature of the VNX measures, monitors and controls application performance on the storage
system?
A. FASTVP
B. Unisphere Quality of Service Manager
C. Unisphere Analyzer
D. Data Compression
Answer: B

EMC   EVP-100認定試験   EVP-100問題集   EVP-100   EVP-100認定証

NO.11 Which two (2) VNX Arrays will the Velocity partners focus their efforts on selling?
A. VNX5700
B. VNX5300
C. VNX5500
D. VNX7500
E. VNX5100
Answer: B,E

EMC   EVP-100認証試験   EVP-100

NO.12 What feature of the VNX allows the array to avoid cache misses and improves response time by
promoting data from Hard Disk Drives to Flash Drives?
A. FASTVP
B. Data Compression
C. Fash Cashe
D. Unisphere Analyzer
Answer: C

EMC   EVP-100   EVP-100練習問題

NO.13 Which two (2) new drive types were introduced with the VNX array family?
A. Enterprise Flash Drives
B. SAS
C. Fibre Channel
D. SATA Flash Drives
E. NL SAS
Answer: B,E

EMC問題集   EVP-100問題集   EVP-100   EVP-100

NO.14 What feature of the VNX allows the array to move more active data to faster drives and less active
data to
slower drives?
A. FASTVP
B. FAST Cashe
C. Unisphere Analyzer
D. Data Compression
Answer: A

EMC   EVP-100認定証   EVP-100   EVP-100   EVP-100練習問題

NO.15 Which compression state is being utilized when data compression is first enabled while background
setup
operations are performed by system?
A. Compressing
B. Compressed
C. Queued
D. Initializing
Answer: D

EMC   EVP-100認定資格   EVP-100   EVP-100練習問題

NO.16 When comparing the different software suites for the VNXe, which one of the software suites provides
for file and block snapshots?
A. Remote Protection Suite
B. Application Protection Suite
C. Security and Compliance Suite
D. Local Protection Suite
Answer: D

EMC   EVP-100練習問題   EVP-100   EVP-100

NO.17 Which (3) are considered software features of VNX.?
A. Unified IP based protocols
B. Aggregated Summary Capacity View
C. FibreChannel Connectivity
D. Simplified Management
E. Integrated Data Protection
F. Active/active ease of use
Answer: B,C,F

EMC   EVP-100   EVP-100認定資格   EVP-100認定証

NO.18 Which suite of software is the Unisphere Analyzer part of?
A. VNX Local Protection Suite
B. VNX Security and Compliance Suite
C. VNX Remote Protection Suite
D. VNX FAST Suite
Answer: D

EMC問題集   EVP-100認定証   EVP-100   EVP-100認定試験

NO.19 What is the term used to describe the total amount of Thin LUN user capacity that is configured in the
Pool and
is presented to the attached hosts?
A. Over Subscribed Capacity
B. Host Capacity
C. Subscribed Capacity
D. User Capacity
Answer: C

EMC   EVP-100過去問   EVP-100

NO.20 What type of drive is best suited for environments where high IOPS is required?
A. SAS
B. Flash Drives
C. Fibre Channel
D. NL SAS
Answer: B

EMC   EVP-100認定試験   EVP-100練習問題   EVP-100

みなさんにIT-Passports.comを選ぶのはより安心させるためにIT-Passports.comは部分のEMC EVP-100試験材料がネットで提供して、君が無料でダウンロードすることができます。安心に弊社の商品を選ぶとともに貴重な時間とエネルギーを節約することができる。IT-Passports.comは真実のEMC EVP-100認証試験の問題集が100%で君の試験の合格を保証します。君の明るい将来を祈っています。

EMC E20-885認定試験の過去問を探しているならコレを使おう

IT認証試験に合格したい受験生の皆さんはきっと試験の準備をするために大変悩んでいるでしょう。しかし準備しなければならないのですから、落ち着かない心理になりました。しかし、IT-Passports.comのEMCのE20-885トレーニング資料を利用してから、その落ち着かない心はなくなった人がたくさんいます。IT-Passports.comのEMCのE20-885トレーニング資料を持っていたら、自信を持つようになります。試験に合格しない心配する必要がないですから、気楽に試験を受けることができます。これは心のヘルプだけではなく、試験に合格することで、明るい明日を持つこともできるようになります。

IT業の多くの人がいくつか認証試験にパスしたくて、それなりの合格証明書が君に最大な上昇空間を与えます。この競争の激しい業界でとんとん拍子に出世させるのはEMCのE20-885認定試験ですが、簡単にパスではありません。でもたくさんの方法があって、最も少ない時間をエネルギーをかかるのは最高です。

適切なトレーニングを選ぶのは成功の保証になれますが、何を選ぶのは非常に重要なことです。IT-Passports.comはとても人気がありますから、それを選ばない理由はないです。もちろん、完璧なトレーニング資料を差し上げましたが、もしあなたに向いていないのなら無用になりますから、IT-Passports.comを利用する前に、一部の問題と解答を無料にダウンロードしてみることができます。そうしたら、完全な試験準備をして、気楽に試験を受かることができるようになります。それも何千何万の受験生がIT-Passports.comを選んだ重要な理由です。IT-Passports.comは一番よい、一番実用的な、一番完全な試験トレーニング資料を提供していますから、受験生たちが試験を準備することに意重要な助けになります。

生活で他の人が何かやったくれることをいつも要求しないで、私が他の人に何かやってあげられることをよく考えるべきです。職場でも同じです。ボスに偉大な価値を創造してあげたら、ボスは無論あなたをヘアします。これに反して、あなたがずっと普通な職員だったら、遅かれ早かれ解雇されます。ですから、IT認定試験に受かって、自分の能力を高めるべきです。 IT-Passports.comのEMCのE20-885試験問題集はあなたが成功へのショートカットを与えます。IT 職員はほとんど行動しましたから、あなたはまだ何を待っているのですか。ためらわずにIT-Passports.comのEMCのE20-885試験トレーニング資料を購入しましょう。

IT業種は急激に発展しているこの時代で、IT専門家を称賛しなければならないです。彼らは自身が持っている先端技術で色々な便利を作ってくれます。それに、会社に大量な人的·物的資源を節約させると同時に、案外のうまい効果を取得しました。彼らの給料は言うまでもなく高いです。そのような人になりたいのですか。羨ましいですか。心配することはないです。IT-Passports.comのEMCのE20-885トレーニング資料はあなたに期待するものを与えますから。IT-Passports.comを選ぶのは、成功を選ぶということになります。

IT-Passports.comのE20-885問題集は多くの受験生に検証されたものですから、高い成功率を保証できます。もしこの問題集を利用してからやはり試験に不合格になってしまえば、IT-Passports.comは全額で返金することができます。あるいは、無料で試験E20-885問題集を更新してあげるのを選択することもできます。こんな保障がありますから、心配する必要は全然ないですよ。

試験番号:E20-885問題集
試験科目:EMC 「VNX Solutions Expert Exam for Implementation Engineers」
問題と解答:全163問

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/E20-885.html

NO.1 You are planning a CIFS DR solution for two existing EMC VNX. Each VNX has dual Control Stations.
Each VNX is also configured for a RecoverPoint protection solution on other VNX LUNs that are non-file
related. What recommendation would you give the customer concerning the CIFS DR solution?
A. Configure IP aliasing on the Control Stations for both source and destination VNX systems before
configuring VNX Replicator
B. Configure IP aliasing on the Control Stations for both source and destination VNX systems after
configuring VNX Replicator
C. Configure IP aliasing on the source VNX system Control Stations before configuring VNX Replicator,
and then configure IP aliasing on the destination VNX system Control Stations after configuring VNX
Replicator.
D. Configure IP aliasing on the source VNX system Control Stations before configuring VNX Replicator
and use RecoverPoint to provide protection of the source VNX Control Stations to the destination VNX.
Answer: A

EMC   E20-885   E20-885

NO.2 A system administrator wants to migrate medical-imaging data stored on an EMC VNX. The host
connects to the VNX via iSCSI. The IP SAN infrastructure has recently been updated to support 1 Gb/10
GB switching. The system administrator wants to maximize data transfer performance. What would you
recommend?
A. Implement 10 Gb/s iSCSI connection using a 9000 byte frame.
B. Use a 4 KB memory page size.
C. Implement 10 Gb/s iSCSI connection using a 2400 byte frame.
D. Increase the write-aside value.
Answer: A

EMC問題集   E20-885   E20-885   E20-885参考書

NO.3 A customer recently purchased an EMC VNX to be connected to four ESXi 5.0 hosts via FC. Five of the
associated VMs (virtual machines) are running SQL Server 2008 R2. To avoid contention, the customer
wants the VM's database and log drives on separate datastores.
Which ESXi 5.0 feature would satisfy this requirement?
A. Network interface card teaming
B. Virtual Machine Anti-Affinity
C. Raw Device Mappings
D. VMDK Affinity
Answer: B

EMC参考書   E20-885練習問題   E20-885

NO.4 Click on the calculator icon in the upper left-hand corner.
A SQL database requires 1,000 I/O per second with 85% reads and 15% writes. If RAID 1/0 is used, what
is the total number of spindles required to generate the required I/O per second?
A. Ten 10K drives
B. Four 15K drives
C. One Flash drive
D. Fourteen 7.2K drives
Answer: A

EMC認定試験   E20-885   E20-885認定証

NO.5 A customer has a Windows-only environment connected to an EMC VNX for File at their main campus
site. The customer plans to install a new EMC VNX at a remote branch office site. The new VNX will be
used to implement a DR solution for their main campus VNX using several deduplicated file systems
shared and available to clients via CIFS.
Which solution do you recommend to the customer?
A. Use VNX Replicator to replicate the VNX VDMs and associated file systems from the main campus site
to the VNX system at the branch office site to provide an asynchronous DR solution.
B. Use VNX Replicator to replicate the VNX VDMs and associated file systems from the main campus site
to the VNX system at the branch office site to provide a synchronous DR solution.
C. Use VNX SAN Copy to replicate the VNX block devices associated with the VNX file systems from the
main campus site to the VNX system at the branch office site to provide a synchronous DR solution.
D. Use VNX MirrorView/A to replicate the VNX block devices associated with the VNX file systems from
the main campus site to the VNX system at the branch office site to provide an asynchronous DR solution.
Answer: A

EMC過去問   E20-885参考書   E20-885参考書

NO.6 A customer has a CIFS DR solution with EMC VNX using a One-to-Many replication topology. The
customer asks you to explain replication behavior under the following conditions:
Production site failover or switchover to a DR site
Replication start and reverse is performed
What would you advise the customer?
A. The original production site remains a One-to-Many replication source for the other remaining DR sites.
B. All remaining replications sessions to the other DR sites are suspended.
C. The original production site goes into cascade mode to remain a replication source for the remaining
DR sites.
D. The DR site becomes the replication source for the remaining DR sites and the original production site
is marked as invalid.
Answer: C

EMC認定資格   E20-885   E20-885練習問題   E20-885

NO.7 A customer requires an asynchronous DR solution for an NFS-only client environment. The customer
wants the solution to be simple to implement. It was recommended they create a single NIS domain, and
use several NIS servers to provide centralized authentication to the NFS clients at both the source and
destination sites. The customer asks you whether they should consider using VDMs in this environment.
What do you advise?
A. VDMs would offer no advantages to this environment.
B. VDMs allow VMWare integration of NFS service environments.
C. VDMs eliminate the need for Usermapper in NFS environments.
D. VDMs allow for assignment of specific CPUs to a NFS server.
Answer: A

EMC   E20-885   E20-885   E20-885認定試験

NO.8 A customer has two EMC VNX configured to replicate between sites. Each VNX has dual Control
Stations. The primary Control Station at the source site fails at 6 p.m. and reboots. At 8 p.m., the customer
completes DR testing and observes CIFS replication does not failover to the target site VNX. Why does
CIFS replication not failover to the target VNX during the DR test?
A. The control station of the primary VNX should have been failed back.
B. The control station of the second VNX should have been failed over.
C. The control station of the primary VNX should have IP bounding enabled.
D. The control station of the secondary VNX should have IP bounding enabled.
Answer: A

EMC   E20-885   E20-885問題集

NO.9 A customer has two identically configured Linux hosts (OS version, memory, CPU) attached to the
same network. One host is NFS-attached and the other is FC-attached to an EMC VNX. Both the NFS file
systems and the SAN LUNs are created from four RAID 5 (4+1) RAID groups. LUNs are not shared
between file and block.
The customer reports NFS-attached host is able to achieve much greater throughput via NFSv4 versus
the FC-attached host.
What is the source of the performance difference between the file and block configurations?
A. FC encapsulation overhead
B. I/O size
C. Host Patch levels
D. NFS version
Answer: B

EMC問題集   E20-885   E20-885   E20-885認定試験   E20-885   E20-885認定資格

NO.10 A storage administrator reports they are unable configure SAN Copy connections between two VNX.
The required cabling is in place and zoning is correct, but the SP connections still do not appear in
Unisphere Manager. What could have caused this issue?
A. SAN Copy is not installed on both VNX arrays.
B. SAN Copy is only licensed for local copies.
C. The SP ports are already being used by hosts.
D. Both VNX arrays are not in the same domain.
Answer: D

EMC   E20-885認定資格   E20-885認定証   E20-885

NO.11 A Pool used for FAST VP has the following configuration:
Flash drives: 1,000 GB, with 1,000 GB free
SAS drives: 5,000 GB, with 2,500 GB free
NL-SAS drives: 20,000 GB, with 11,500 GB free
The tiering policy is set to Auto. An additional 600 GB of new data is written to the Pool.
What is the data distribution after the data is written?
A. Flash drives: 960 GB free SAS drives: 2,400 GB free NL-SAS drives: 11,040 GB free
B. Flash drives: 400 GB free SAS drives: 2,500 GB free NL-SAS drives: 11,500 GB free
C. Flash drives: 900 GB free SAS drives: 2,000 GB free NL-SAS drives: 11,500 GB free
D. Flash drives: 970 GB free SAS drives: 2,350 GB free NL-SAS drives: 11,080GB free
Answer: A

EMC認定証   E20-885練習問題   E20-885

NO.12 A customer has an Oracle ASM database on an EMC VNX with FAST Suite enabled. They observe
intermittent performance degradation due to momentary data hot spots caused by bursty transaction rates.
What recommendation would you make to help alleviate these hot spots?
A. Enable Fast VP on the ASM LUNs
B. Modify the ASM rebalance power priority
C. Enable Fast Cache on the ASM LUNs
D. Disable ASM storage management
Answer: C

EMC   E20-885認証試験   E20-885   E20-885認定証

NO.13 A customer plans to connect ESXi 5.0 hosts to a new EMC VNX array. They want to take advantage of
the hardware-assisted locking feature in VAAI. Which is a feature of hardware-assisted locking?
A. Locking at the block level of a logical unit
B. Locking the LUN instead of the block level
C. Accessing a block from multiple hosts at the same time
D. Automatic enabling of safe data caching
Answer: A

EMC   E20-885問題集   E20-885   E20-885

NO.14 A customer has two identically configured Linux hosts (OS version, memory, CPU) attached to the
same network. One host is NFS-attached and the other is FC-attached to an EMC VNX. Both the NFS file
systems and the SAN LUNs are created from four RAID 5 (4+1) RAID groups. LUNs are not shared
between file and block and each host generates the same size I/O.
The customer reports the FC-attached host is able to achieve much greater throughput than the
NFS-attached host.
What is the source of the performance difference between the file and block configurations?
A. FC encapsulation overhead
B. Host Patch levels
C. Ethernet Network
D. NFS version
Answer: C

EMC参考書   E20-885練習問題   E20-885   E20-885   E20-885参考書

NO.15 A customer wants to replicate a CIFS environment from a legacy EMC Celerra to a new EMC VNX.
Users are able to access CIFS shares from both arrays. The CIFS shares are on different networks and
replication is not running. The customer wants to make sure there will be no network restrictions
preventing replication between the data movers on two different networks.
What TCP ports should they ask the network team to open?
A. 8888, 8887, 5081
B. 80, 443, 8080
C. 5057, 445, 5087
D. 23, 25, 22
Answer: A

EMC   E20-885   E20-885   E20-885

NO.16 A customer has two EMC VNX, one at the primary site and the other at a DR site located 100 km away.
The WAN connection between sites is a 100 Mb/s dark fiber link with 4 ms latency.
A previous storage administrator configured the pool LUNs for the file system on thin LUNs. The file
system is growing at a rate of 500 GB per week and is on a VDM. The new storage administrator reports
performance issues with the file system.
What is the most likely reason for the performance issue?
A. Thin LUNs are used for the file system.
B. The WAN link should be upgraded to an eLAN.
C. The VNX system requires an upgrade.
D. The file system has too many concurrent users connected.
Answer: A

EMC   E20-885   E20-885   E20-885問題集

NO.17 An administrator is attempting to vMotion a VM from one vSphere ESXi 5.0 host to another. The ESXi
servers are connected to three VNX arrays on the fabric. The vMotion fails. What is the most likely
reason?
A. RDMs are attached to the VM with different host LUN numbers on the ESXi servers.
B. There are active SnapView sessions on the VM preventing the vMotion.
C. RDMs are in physical compatibility mode and not eligible for vMotion.
D. There are active MirrorView sessions on the VM preventing the vMotion.
Answer: A

EMC認定証   E20-885過去問   E20-885   E20-885

NO.18 A customer requests a performance review of their EMC VNX before FAST Cache is implemented.
You notice a dedicated LUN has a write size of 4 KB, and the disks are performing writes of 8 KB. What is
causing this behavior?
A. Coalescing
B. Pre-fetching
C. Flushing
D. Promotion
Answer: A

EMC過去問   E20-885認定試験   E20-885問題集

NO.19 A client has an EMC VNX configured with four storage ports, four 15-drive DAEs (disk array
enclosures) and a total of forty drives (20 NL-SAS and 20 SAS drives). The client is using RAID 5 (4+1)
RAID groups with a traditional LUN configuration.
What is the recommended SAS LCC port configuration for optimal performance?
A. Distribute drives evenly across all ports
B. Distribute drives on all odd ports
C. Distribute drives on all even ports
D. Distribute drives on a single port
Answer: A

EMC認定試験   E20-885認定証   E20-885認定試験   E20-885参考書   E20-885

NO.20 A customer recently upgraded from vSphere v4.x to vSphere v5.0 to benefit from new VMFS-5 features
for their existing DataStore1 ¯ and DataStore2 ¯ datastores on an EMC VNX. A second identically
configured VNX was implemented and the customer created two additional datastores on the new VNX.
After monitoring the environment, the customer notices the VMs on DataStore1 ¯ and DataStore2 ¯
are not using the same sub-block structure as the two new datastores.
What is the reason for this behavior.?
A. The old VMs are on an upgraded VMFS-5 datastore.
B. The old VMs are still running old VMware tools.
C. The new VMFS-5 features need to be licensed and activated.
D. The new VMFS-5 cannot support two VNX storage systems.
Answer: A

EMC参考書   E20-885過去問   E20-885認定資格   E20-885

EMCのE20-885の認定試験証明書を取りたいなら、IT-Passports.comが貴方達を提供した資料をかったら、お得です。ass4Testはもっぱら認定試験に参加するIT業界の専門の人士になりたい方のために模擬試験の練習問題と解答を提供した評判の高いサイトでございます。

EMC E20-554認定試験の資格を通して将来性を広げる

EMCのE20-554認定試験を除いて、最近非常に人気がある試験はまたEMC、Cisco、IBM、SAPなどの様々な認定試験があります。しかし、もしE20-554認証資格を取りたいなら、IT-Passports.comのE20-554問題集はあなたを願望を達成させることができます。試験の受験に自信を持たないので諦めることをしないでください。IT-Passports.comの試験参考書を利用することを通して自分の目標を達成することができますから。E20-554認証資格を入手してから、他のIT認定試験を受験することもできます。IT-Passports.comの試験問題集を手にすると、どのような試験でも問題ではありません。

IT-Passports.comを選ぶかどうか状況があれば、弊社の無料なサンプルをダウンロードしてから、決めても大丈夫です。こうして、弊社の商品はどのくらいあなたの力になるのはよく分かっています。IT-Passports.comはEMC E20-554認証試験を助けって通じての最良の選択で、100%のEMC E20-554認証試験合格率のはIT-Passports.com最高の保証でございます。君が選んだのはIT-Passports.com、成功を選択したのに等しいです。

IT-Passports.comはたくさんIT関連認定試験の受験者に利便性を提供して、多くの人がIT-Passports.comの問題集を使うので試験に合格しますた。彼らはIT-Passports.comの問題集が有効なこと確認しました。IT-Passports.comが提供しておりますのは専門家チームの研究した問題と真題で弊社の高い名誉はたぶり信頼をうけられます。安心で弊社の商品を使うために無料なサンブルをダウンロードしてください。

試験番号:E20-554問題集
試験科目:EMC 「Isilon Design Specialist Exam for Technology Architects」
問題と解答:全81問

IT-Passports.comを通してEMC E20-554試験に合格することがやすくて、EMC E20-554試験をはじめて受ける方はIT-Passports.comの商品を選んで無料なサンプル(例年の試験問題集と解析)をダウンロードしてから、楽に試験の現場の雰囲気を体験することができます。オンラインにいろいろなEMC E20-554試験集があるですけれども、弊社の商品は一番高品質で低価額で、試験の問題が絶えず切れない更新でテストの内容ともっとも真実と近づいてお客様の合格が保証いたします。それほかに、弊社の商品を選んで、勉強の時間も長くではありません。できるだけ早くEMC E20-554認定試験を通ろう。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.it-passports.com/E20-554.html

NO.1 You meet a customer for the first time. They explain that their current environment for NAS
does not meet their needs. You want to make sure that Isilon is a good fit for their needs.
What would be a good prequalifying question to ask?
A. What application are you using to create directories?
B. Is your datacenter ISO9001 compliant?
C. What protocols are accessing your NAS?
D. How many users are in your Directory Services?
Answer: C

EMC   E20-554   E20-554   E20-554   E20-554

NO.2 What key considerations should be kept in mind when designing a 300TB solution?
A.Workflow management Defining class of service Time of day services RPO and RTO Data retention
and backup
B.Defining class of service Time of day services ROI and TCO Data retention and backup
C.SmartPools Smartconnect Snapshots Space for snapshots
D.Always include 2% SSD SmartPools Smartconnect Snapshots InsightIQ
Answer: A

EMC過去問   E20-554   E20-554   E20-554   E20-554

NO.3 You set up a meeting to gather information on a new project with the IT manager and plan to
use a workflow profile assessment (WPA) to document the requirements.
Why is it recommended to talk to as many stakeholders as possible?
A. Completing this document gives sales a list of who the stakeholders are at customer site.
B. Helps downstream personnel, such as implementation and delivery, to have a clearer
understanding of the requirements.
C. Using workflow profile enables sales to take this information to EMC consulting for review to
validate the configuration.
D. Using the WPA tool will give you the best "big picture" to see things such as block size, de-dupe,
file size and volumes.
Answer: B

EMC   E20-554   E20-554認定資格

NO.4 When designing Isilon solutions, which issue should you pay special attention to?
A. Create a workflow document
B. Conduct stakeholder interviews
C. Follow all SSD sizing rules
D. Meet customer expectations
Answer: D

EMC認証試験   E20-554   E20-554   E20-554問題集

NO.5 You meet a customer for the first time. They explain that their current environment for NAS
does not meet their needs. You want to make sure that Isilon is a good fit for their needs.
What would be a good prequalifying question to ask?
A. What applications access this storage?
B. What type of racks are in your datacenter?
C. Are you using a KVM to access your storage?
D. How many NICs do your clients have?
Answer: A

EMC問題集   E20-554認証試験   E20-554   E20-554認定試験

NO.6 When conducting high-level interviews with stakeholders of a project, what are the key
questions that should be asked?
A.How much usable storage are you looking for? What client OS will access this storage? Which
applications will access this storage?
B.Which backup application is in use today?
What is your change rate?
How many clients will connect to the cluster?
C.What does your network architecture look like?
Do you have existing NAS infrastructure?
Do you have 10Gb or 1Gb ethernet?
Which applications will access this storage?
D.Who are the application owners?
How much usable storage is needed?
What applications will be accessing the storage?
How many users are in your Active Directory?
Answer: A

EMC認定試験   E20-554認定証   E20-554   E20-554認定試験

NO.7 You are reviewing an opportunity with a trusted advisor. You both discover gaps in the initial
solution design.
Each iterative discussion with the customer helps you define the solution better. The documents
produced capture the customer's requirements.
What else needs to occur to refine the sizing considerations?
A. Complete your Solution Design Document and forward to EMC consulting.
B. Validate the Workflow Profile Assessment and test the solution against your findings.
C. Review you assumptions and ask the customer what business issue you're solving.
D. Provide the CIO with the findings and gain commitment to a Proof of Concept.
Answer: B

EMC   E20-554認証試験   E20-554問題集   E20-554参考書   E20-554認定試験   E20-554練習問題

NO.8 You have had several discussions with your customer in the processor design industry. They
have stated that they want a Scale-Out NAS platform for their design environment. Their most
significant responses were "We have 125 design engineers accessing large diagrams and we need
high throughput to support them. Can we also get the highest performance available? We need to
stay ahead of our competitors." Other areas you discussed were their data retention policies and
workflow after the chip design is completed. They plan to archive the design files but the files must
stay on line.
What is your initial node recommendation?
A. A-Series nodes for the active diagrams and X-Series nodes for the archives.
B. S-Series nodes for the active diagrams and NL Series nodes for the archives
C. X-Series nodes for the active diagrams and NL 400 nodes for the archives
D. X-Series nodes with SSD for the active diagrams and NL nodes for the archives
Answer: B

EMC   E20-554参考書   E20-554   E20-554

NO.9 Your customer purchased an Isilon cluster with eight X400 nodes for Home Directories. Your
follow-up discussions have uncovered an opportunity to expand the cluster to support the Legal
Department. As you prepare to complete the Workflow Profile Document, you meet with the
customer to discuss data protection.
Which key areas should you address?
A.Default cluster protection level Additional directory level protections Snapshots and replication
B.WORM requirements Network ports for replication Snapshots for user restores
C.Default cluster protection level Backup windows and processes Concurrency of user access
D.Protocols (SMB, NFS, FTP , HTTP , HDFS) Authentication and Directory Services Performance and
latency concerns
Answer: A

EMC認証試験   E20-554   E20-554   E20-554過去問

NO.10 When designing Isilon solutions, what issues should you pay special attention to?
A.Avoid being too enthusiastic over the technology Balance technical and business requirements
Provide options Design to meet customer expectations
B.Workflow Document Solutions Document Application types Data strategy
C.Solutions Document Balance technical and business requirements Provide options Practical vs.
theoretical implementations
D.Solutions Document Balance technical and business requirements Downstream hand-off Design
to meet customer expectations
Answer: A

EMC   E20-554認定試験   E20-554   E20-554認証試験

どのようにすればもっと楽にEMCのE20-554認定試験に合格することができるかについて考えたことがありますか。試験に合格する秘密を見つけましたか。それを行う方法がわからない場合、私は教えてあげましょう。実際には、認定試験に合格できる方法が多くあります。試験に関連する知識を一生懸命習得することがただ一つの方法です。今はそのようにしていますか。しかし、これが一番時間を無駄にして、望ましい効果を得られない方法です。それに、毎日仕事で忙しいあなたは、恐らく試験に準備する充分な時間がないでしょう。では、IT-Passports.comのE20-554問題集を試しましょう。この試験参考書はきっとあなたに思えぬ良い結果を与えられます。