0B0-108はBEAのひとつの認証で、0B0-108がBEAに入るの第一歩として、0B0-108試験がますます人気があがって、0B0-108に参加するかたもだんだん多くなって、しかし0B0-108認証試験に合格することが非常に難しいで、君は0B0-108に関する試験科目の問題集を購入したいですか？
適切なトレーニングを選ぶのは成功の保証になれますが、何を選ぶのは非常に重要なことです。IT-Passports.comはとても人気がありますから、それを選ばない理由はないです。もちろん、完璧なトレーニング資料を差し上げましたが、もしあなたに向いていないのなら無用になりますから、IT-Passports.comを利用する前に、一部の問題と解答を無料にダウンロードしてみることができます。そうしたら、完全な試験準備をして、気楽に試験を受かることができるようになります。それも何千何万の受験生がIT-Passports.comを選んだ重要な理由です。IT-Passports.comは一番よい、一番実用的な、一番完全な試験トレーニング資料を提供していますから、受験生たちが試験を準備することに意重要な助けになります。
成功した方法を見つけるだけで、失敗の言い訳をしないでください。BEAの0B0-108試験に受かるのは実際にそんなに難しいことではないです。大切なのはあなたがどんな方法を使うかということです。IT-Passports.comのBEAの0B0-108試験トレーニング資料はよい選択で、あなたが首尾よく試験に合格することを助けられます。これも成功へのショートカットです。誰もが成功する可能性があって、大切なのは選択することです。
試験番号：0B0-108問題集
試験科目：BEA 「System Administration Exam」
問題と解答：全70問
IT-Passports.comのBEAの0B0-108認証試験について最新な研究を完成いたしました。無料な部分ダウンロードしてください。きっと君に失望させないと信じています。最新BEAの0B0-108認定試験は真実の試験問題にもっとも近くて比較的に全面的でございます。
多くのIT業界の友達によるとBEA認証試験を準備することが多くの時間とエネルギーをかからなければなりません。もし訓練班とオンライン研修などのルートを通じないと試験に合格するのが比較的に難しい、一回に合格率非常に低いです。IT-Passports.comはもっとも頼られるトレーニングツールで、BEAの0B0-108認定試験の実践テストソフトウェアを提供したり、BEAの0B0-108認定試験の練習問題と解答もあって、最高で最新なBEAの0B0-108認定試験問題集も一年間に更新いたします。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/0B0-108.html
NO.1 WebLogic store-and-forward service is used for:
A. Storing and forwarding the configuration reliably to all the Managed Servers in a cluster
B. Storing log messages and forwarding them to the administration server for creating the Domain Log
C. Storing and delivering JMS messages reliably between applications across WebLogic Server 9.x
instances
D. Storing and forwarding EJB requests reliably to a back-end EJB cluster
Answer: C
BEA過去問 0B0-108認定資格 0B0-108
NO.2 When configuring JMS Modules using the WebLogic Administration Console or WLST, the module
information will be stored in:
A. <modulename> stanza in the weblogic-application.xml file.
B. <modulename> stanza in the config\config.xml file.
C. <domain>/config/jms/<modulename>-jms.xml file
D. <domain>/servers/<servername>/targets/jms/<modulename>_<servername>.xml
Answer: C
BEA過去問 0B0-108 0B0-108認証試験
NO.3 Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 9.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to
upgrade the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to
configure multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is
via a JMS message bridge. When a service engineer calls in with a report, a message is sent via JMS to
the Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is
not lost because the call management system is not able to resend messages. To address this, the
Customer Service application is accessing a persistent JMS Queue using an XA compatible connection
factory.
Before deploying it into the test environment, you review the configuration of the Sales department's
Enterprise Application, which is meant to contain a JDBC Application Module you are concerned that it
may not have been built correctly. Which of the following is not a requirement for JDBC modules?
A. It is contained in a file that ends in -jdbc.xml.
B. It includes an element that lists its targets.
C. It conforms to the weblogic-jdbc.xsd schema.
D. It includes a unique name element.
Answer: B
BEA参考書 0B0-108練習問題 0B0-108 0B0-108認定資格
NO.4 The default location for storing JMS persistent messages in WebLogic Server 9.x is:
A. Database Store using JDBC
B. WebLogic Persistent Store using a file
C. LDAP server using the embedded LDAP server
D. Remote server using t3 socket buffering
Answer: B
BEA 0B0-108過去問 0B0-108
NO.5 Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 9.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to
upgrade the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to
configure multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is
via a JMS message bridge. When a service engineer calls in with a report, a message is sent via JMS to
the Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is
not lost because the call management system is not able to resend messages. To address this, the
Customer Service application is accessing a persistent JMS Queue using an XA compatible connection
factory.
In the future, each department will have its own schema within the Oracle database and the developers
are writing their code with this in mind. However, for now, it has been decided to store all data in a single,
company-wide schema. Which of the following approaches will make a future move to multiple schema
simple, while making the most efficient use of resources today?
A. Deploy an application-scoped Data Source module with each application.
B. Deploy a Data Source system module and assign it multiple JNDI names.
C. Deploy each department's application to its own WebLogic server.
D. Deploy a Data Source system module for each department's application.
Answer: B
BEA 0B0-108 0B0-108認定資格 0B0-108 0B0-108
NO.6 Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 9.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to
upgrade the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to
configure multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is
via a JMS message bridge. When a service engineer calls in with a report, a message is sent via JMS to
the Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is
not lost because the call management system is not able to resend messages. To address this, the
Customer Service application is accessing a persistent JMS Queue using an XA compatible connection
factory.
Before deploying it into the test environment, you review the configuration of the Sales department's
Enterprise Application, which is meant to contain a JDBC Application Module ?you are concerned that it
may not have been built correctly. Most of an application's deployment descriptors only reference the
JDBC module using a JNDI name. Which file listed below is the only one that refers directly to the JDBC
Application Module file?
A. config.xml
B. application.xml
C. weblogic-ejb-jar.xml
D. weblogic-application.xml
Answer: D
BEA認証試験 0B0-108問題集 0B0-108過去問 0B0-108 0B0-108
NO.7 Scenario : The Stock Control Application you are going to deploy to a cluster of WebLogic Managed
Servers requires a JMS destination to asynchronously deliver the messages to the back-end
Warehousing Application. To distribute the messages across the cluster, you decided to configure the
distributed destination. Also the Warehousing Application is a legacy application written to implement a
proprietary MQ API connecting an MQ-Series server. The Stock Control Application is implemented as a
web application on a WebLogic cluster delivering the message to the distributed destination. The cluster
has three Managed Servers hosted on two high powered machines and one low range/powered machine.
To distribute the physical destinations unevenly across the clustered WebLogic Managed Servers so that
the high-powered machines can receive more messages than the low-powered machines, configure the
distributed destination with:
A. "Allocate Members Uniformly" set to false and manually select more physical destinations from the
high-powered machines
B. "Uneven Distribution" set to true and select all the physical destinations
C. "Uniform Distribute Destination" set to true and select all the physical destinations from the
high-powered and low- powered machines
D. "Load Balancing Policy" set to Random and select only the destination from the high-powered machine
Answer: A
BEA問題集 0B0-108認定試験 0B0-108 0B0-108参考書
NO.8 Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 9.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to
upgrade the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to
configure multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is
via a JMS message bridge. When a service engineer calls in with a report, a message is sent via JMS to
the Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is
not lost because the call management system is not able to resend messages. To address this, the
Customer Service application is accessing a persistent JMS Queue using an XA compatible connection
factory.
The database team informs you that they have now implemented Oracle Real Application Clusters (RA for
the Customer Service database, and applications should connect to a second database node if the
primary node is unavailable. You set up a Multi Data Source in Failover mode, which is configured to
use two Data Sources PrimaryDS and SecondaryDS, each connecting to one Oracle RAC node.
WebLogic Server will fail over to SecondaryDS if a connection test to PrimaryDS fails. Under what other
condition will this happen by default (that is, with no additional options checke)?
A. If a connection to PrimaryDS is not released within Statement Timeout seconds.
B. If all the connections to PrimaryDS are in use.
C. If the administrator has suspended the PrimaryDS Data Source.
D. Failover will only occur if a connection test fails for a PrimaryDS connection.
Answer: C
BEA 0B0-108過去問 0B0-108認証試験 0B0-108認定試験
NO.9 Scenario : You have made the decision to migrate all your operations onto WebLogic Server. An
application has been chosen from each department for the initial phase of migration one from each of
Sales, Marketing, Accounts, and Customer Service. The applications will be deployed as individual EAR
files to a cluster of WebLogic Server 9.x instances, each with a pool of connections to an Oracle 10g
database that provides corporate and departmental data services. The database team hopes to
upgrade the database to use Oracle RAC (Real Application Clusters) shortly, which will require you to
configure multiple sets of connections. Connectivity to the existing Service Engineer Dispatch system is
via a JMS message bridge. When a service engineer calls in with a report, a message is sent via JMS to
the Customer Service application deployed in WebLogic Server. The customer record in the Customer
Service database must be updated with details from the message. It is important that the message is
not lost because the call management system is not able to resend messages. To address this, the
Customer Service application is accessing a persistent JMS Queue using an XA compatible connection
factory.
When starting WebLogic Server, the Marketing database is unavailable. Which of these Data Source
configuration options will ensure that the Marketing application can access its database once it becomes
available again?
A. Test Connections On Reserve
B. Test Frequency
C. Connection Creation Retry Frequency
D. Login Delay
E. Profile Connection Reservation Wait
Answer: C
BEA認定資格 0B0-108 0B0-108 0B0-108
NO.10 What are the four basic components of a JMS system-resource module in the config.xml in WebLogic
9.x?
A. Name, target, subdeployment, descriptor-file-name
B. Domain, jms-server, connection factory, destination
C. Config.xml, jms-module, subdeployment, descriptor-file-name
D. Name, jms-module, subdeployment, descriptor-file-name
Answer: A
BEA 0B0-108 0B0-108認定資格 0B0-108 0B0-108認証試験
多くの時間と労力をかかってBEAの0B0-108認定試験に合格するを冒険にすると代わりIT-Passports.comが提供した問題集を利用してわずか一度お金かかって合格するのは価値があるでしょう。今の社会の中で時間がそんなに重要で最も保障できるIT-Passports.comを選ばましょう。
没有评论:
发表评论