最新のCisco 642-681試験の問題集

IT-Passports.comのCiscoの642-681試験資料を買いたかったら、弊社は最も良いサービスと最も高品質な製品を提供します。弊社の認証試験のソフトウェアはもうベンダーとサードパーティーの認可を取り、大量なIT技術専門家たちがいますから、お客さんのニーズを答えるためにアウトラインに基づいてシリーズの製品を開発して、お客様の大量の要求を満たすことを保障します。Ciscoの642-681試験資料は最高の専門技術の内容を持っていますから、関連する知識の専門家と学者は研究する材料として利用することができます。弊社が提供した製品は一部の無料試用資料がありますから、購入する前にあなたのテストの質と適用性を保証します。

IT-Passports.comは Ciscoの642-681認定試験の認証に対して特別な教育ツールで、あなたに多くの時間とお金が使わないようにIT技術にも身につけさせるサイトでございます。IT-Passports.comは専門家チームが自分の知識と経験をを利用してCiscoの642-681認証試験の問題集を研究したものでございます。

試験番号：642-681問題集
試験科目：Cisco 「Advanced Wireless LAN for System Engineers Exam」
問題と解答：全93問

Ciscoの642-681認定試験を一回合格するためには必ず良い準備しなければなりません。完全な知識がこの高度専門の試験に合格するのは必要でIT-Passports.comは君にこれらの資源を完全な需要に備わっています。

もう既にCiscoの642-681認定試験を申し込みましたか。「もうすぐ試験の時間なのに、まだ試験に合格する自信を持っていないですが、どうしたらいいでしょうか。何か試験に合格するショートカットがあるのですか。試験参考書を読み終わる時間も足りないですから・・・」いまこのような気持ちがありますか。そうしても焦らないでくださいよ。試験を目前に控えても、ちゃんと試験に準備するチャンスもあります。何のチャンスですかと聞きたいでしょう。それはIT-Passports.comの642-681問題集です。これは効果的な資料で、あなたを短時間で試験に十分に準備させることができます。この問題集の的中率がとても高いですから、問題集に出るすべての問題と回答を覚える限り、642-681認定試験に合格することができます。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/642-681.html

NO.1 How many prior configuration versions can be archived on the CiscoWorks WLSE?
A. two
B. four
C. six
D. eight
Answer: B

Cisco   642-681   642-681参考書   642-681

NO.2 What is the maximum number of access points that a high-end Cisco WCS server can support?
A. 500
B. 1000
C. 1500
D. 3000
Answer: D

Cisco   642-681問題集   642-681認定試験   642-681認定試験   642-681   642-681

NO.3 Which two statements correctly describe the Cisco Catalyst WiSM? (Choose two.)
A. It supports up to 100 access points per module.
B. It supports up to 200 access points per module.
C. It supports up to 300 access points per module.
D. It has a maximum of four modules per chassis.
E. It has a maximum of five modules per chassis.
F. It has a maximum of six modules per chassis.
Answer: CE

Cisco   642-681   642-681   642-681

NO.4 The Newton manufacturing company has three facilities that are located in Columbia, South Carolina.
The corporate office is located in an 11-story building downtown. The R&D facility is located on the north
side of the city approximately 4 miles (6.4 km) from the corporate office in a five-story building. The
manufacturing facility is located approximately 6 miles (9.6 km) to the northwest of the corporate office.
Line of sight exists from the downtown office to all facilities. Users at the manufacturing plant require
network connectivity for file sharing and e-mail, while the users at the R&D facility require high-speed
Internet access with the ability to send large CAD drawings to the corporate office and large machine
control files to the manufacturing facility. Presently, the manufacturing facility is connected to the
corporate office by a 64-kbps leased line, and the R&D facility is connected to both the corporate office
and the manufacturing facility by a dedicated T1 line. The company plans to add a second line of
development at the R&D facility within the next 60 days. The current T1 lines are at a constant 70-percent
utilization rate. The current projected lead time for installation of additional lines is 90 days if the current
cable plant will support it.
A wireless bridging solution would provide which three benefits to the customer? (Choose three.)
A. rapid deployment
B. immunity to weather
C. increased bandwidth
D. guaranteed bandwidth
E. increased security
F. lower total cost of ownership
Answer: ACF

Cisco   642-681参考書   642-681認定証   642-681   642-681   642-681

NO.5 How is a bridge group name used in a wireless mesh deployment?
A. It is used to retrieve the secret shared key.
B. It logically groups access points to avoid interference from neighboring mesh networks.
C. It is used as a password in communication preceding LWAPP.
D. It is used to join the outdoor mesh network with the controller mobility group.
Answer: B

Cisco   642-681認定試験   642-681練習問題   642-681認定資格   642-681参考書   642-681問題集

NO.6 How many mesh access points can be placed on a map with efficient link rendering in Cisco WCS?
A. 50
B. 100
C. 150
D. 200
Answer: B

Cisco   642-681   642-681認定資格   642-681

NO.7 What is the Cisco-recommended limit of standalone access points to be managed by a CiscoWorks
WLSE 1130-19 with RF management enabled?
A. 1000
B. 1500
C. 1800
D. 2500
Answer: C

Cisco   642-681   642-681認定資格   642-681問題集   642-681

NO.8 Which three wireless intrusion-prevention signatures are part of the standard signature set provided by
the Wireless LAN Controller? (Choose three.)
A. ad-hoc network detection
B. rogue network detection
C. rogue access point detection
D. deauth flood detection
E. fake access point detection
F. NetStumbler detection
Answer: DEF

Cisco   642-681認定資格   642-681   642-681

NO.9 A customer has a small remote site with 10 standalone access points. In which two of the following
scenarios would it be appropriate to implement CiscoWorks WLSE Express? (Choose two.)
A. EAP-Cisco Wireless (Cisco LEAP) security is required and an external AAA server is available.
B. EAP-Cisco Wireless (Cisco LEAP) security is required and no external AAA server is available.
C. EAP-FAST security is required and no external AAA server is available.
D. EAP-FAST security is required and an AAA server is available.
E. MAC authentication is required and no external AAA server is available.
F. MAC authentication is required and an external AAA server is available.
Answer: BC

Cisco問題集   642-681過去問   642-681   642-681練習問題   642-681

NO.10 Which three devices are required to implement a Cisco 2700 Series Wireless Location Appliance?
(Choose three.)
A. wireless controller
B. wireless domain server
C. Cisco Wireless Control System
D. controller-based access point
E. standalone access point
F. CiscoWorks Wireless LAN Solution Engine
Answer: ACD

Cisco練習問題   642-681認定証   642-681過去問   642-681認定証   642-681   642-681認定試験

NO.11 Which one of the following integrated services routers supports the integrated 2.4-GHz b/g access
points?
A. Cisco 1812
B. Cisco 1811
C. Cisco 1841
D. Cisco 1803
Answer: C

Cisco問題集   642-681   642-681   642-681認定証

NO.12 OFDM provides which improvement over DSSS in the 2.4-GHz range?
A. greater resistance to multipath interference
B. more nonoverlapping channels
C. more bandwidth per channel
D. full-duplex communication
Answer: A

Cisco   642-681   642-681   642-681   642-681認定試験

NO.13 A customer in the United States requires connectivity between two campus locations that are located
6 miles (9.65 km) apart. The customer also needs a minimum data rate of 54 Mbps in an area that is
known to have 2.4-GHz interference. Which two devices will provide a bridge link and avoid the
interference? (Choose two.)
A. Cisco Aironet 1100 Series Access Point
B. Cisco Aironet 1210 Series Access Point
C. Cisco Aironet 1242AG Series Access Point
D. Cisco Aironet 1300 Series Outdoor Access Point/Bridge
E. Cisco Aironet 1400 Series Wireless Bridge
Answer: CE

Cisco過去問   642-681   642-681   642-681

NO.14 In a mesh network, what is the recommended hop-count limit of a mesh access point from its
associated root access point?
A. 2
B. 4
C. 6
D. 8
Answer: B

Cisco参考書   642-681認定証   642-681   642-681   642-681問題集

NO.15 Which statement describes how RSSI information is processed in a WLAN with a location appliance
using controller-based products?
A. Access points aggregate RSSI information.
B. WLAN controllers compute RSSI information.
C. The location appliance collects the RSSI information.
D. The Cisco WCS collects and aggregates the RSSI information and forwards it to the location
appliance.
Answer: C

Cisco   642-681練習問題   642-681練習問題   642-681

NO.16 Which two key features are unique to the controller-based feature set? (Choose two.)
A. fast secure roaming
B. rogue access point detection
C. access point participation in RF management
D. access point registration via digital certificate
E. dynamic RF control without a dedicated management platform
Answer: DE

Cisco   642-681   642-681認証試験   642-681   642-681認証試験

NO.17 The Cisco 3200 Series Mobile Access Router has integrated wireless support for which two
FCC-approved frequency ranges? (Choose two.)
A. 900 to 928 MHz
B. 2.400 to 2.4835 GHz
C. 4.940 to 4.990 GHz
D. 5.150 to 5.250 GHz
E. 5.725 to 5.825 GHz
Answer: BC

Cisco   642-681   642-681認定試験   642-681過去問

NO.18 What is the maximum number of wireless devices that a Cisco 2700 Series Wireless Location
Appliance can track, operating with Cisco WCS version 4.0?
A. 500
B. 1000
C. 1500
D. 2500
Answer: D

Cisco認定試験   642-681   642-681   642-681認定証   642-681

NO.19 The CiscoWorks Wireless LAN Solution Engine uses which protocol for radio management?
A. CCKM
B. LWAPP
C. SNMP
D. WLCCP
Answer: D

Cisco認証試験   642-681認定資格   642-681   642-681   642-681

NO.20 The Newton Manufacturing Company has three facilities that are located in Columbia, South Carolina.
The corporate office is located in an 11-story building downtown. The R&D facility is located on the north
side of the city approximately 4 miles (6.4 km) from the corporate office in a five-story building. The
manufacturing facility is located approximately 6 miles (9.6 km) to the northwest of the corporate office.
Line of sight exists from the downtown office to all facilities. Users at the manufacturing plant require
network connectivity for file-sharing and e-mail, while the users at the R&D facility require high-speed
Internet access with the ability to send large CAD drawings to the corporate office and large machine
control files to the manufacturing facility. Presently, the manufacturing facility is connected to the
corporate office by a 64-kbps leased line, and the R&D facility is connected to both the corporate office
and the manufacturing facility by a dedicated T1 line. The company plans to add a second line of
development at the R&D facility within the next 60 days. The current T1 lines are at a constant 70 percent
utilization rate. The current projected lead time for installation of additional lines is 90 days if the cable
plant will support it.
Which deployment option would provide the most benefit to the customer?
A. point-to-point link from corporate to manufacturing, and a point-to-point link from corporate to R&D
B. point-to-multipoint solution with the root bridge located at the manufacturing facility
C. point-to-multipoint solution with the root bridge located at the corporate office
D. point-to-multipoint solution with the root bridge located at the R&D facility
Answer: D

Cisco問題集   642-681認定試験   642-681   642-681問題集   642-681   642-681

しかし、642-681試験は簡単ではありません。専門的な知識が必要で、もしあなたはまだこの方面の知識を欠かれば、IT-Passports.comは君に向ける知識を提供いたします。IT-Passports.comの専門家チームは彼らの知識や経験を利用してあなたの知識を広めることを助けています。そしてあなたに642-681試験に関するテスト問題と解答が分析して差し上げるうちにあなたのIT専門知識を固めています。