あなたの目標はとても高いですから、あなたに色々なヘルプをあげられる資料が必要です。IT-Passports.com HPのHP0-Y30試験問題集はあなたが自分の目標を達成することを助けられます。IT-Passports.com HPのHP0-Y30問題資料は高度に認証されたIT領域の専門家の経験と創造を含めているものです。当社の製品は、すべての可能性のある問題を試させられます。受験生の皆様に問題の１００パーセント真実な解答を提供することを保証します。
IT-Passports.comにIT業界のエリートのグループがあって、彼達は自分の経験と専門知識を使ってHP HP0-Y30認証試験に参加する方に対して問題集を研究続けています。君が後悔しないようにもっと少ないお金を使って大きな良い成果を取得するためにIT-Passports.comを選択してください。IT-Passports.comはまた一年間に無料なサービスを更新いたします。
IT-Passports.comはその近道を提供し、君の多くの時間と労力も節約します。IT-Passports.comはHPのHP0-Y30認定試験に向けてもっともよい問題集を研究しています。もしほかのホームページに弊社みたいな問題集を見れば、あとでみ続けて、弊社の商品を盗作することとよくわかります。ass4Testが提供した資料は最も全面的で、しかも更新の最も速いです。
試験番号：HP0-Y30問題集
試験科目：HP 「Implementing HP Networking Technologies」
問題と解答：全137問
最もリラックスした状態ですべての苦難に直面しています。HPのHP0-Y30試験はとても難しいですが、受験生の皆がリラックスした状態で試験を受けるべきです。。IT-Passports.comのHPのHP0-Y30試験トレーニング資料は私達を助けられます。IT-Passports.comがそばにいてくれると、恐くなくなり、迷わなくなります。IT-Passports.comのHPのHP0-Y30試験トレーニング資料は私達受験生の最良の選択です。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/HP0-Y30.html
NO.1 You must configure SSH on an HP A7500 switch. Which item must be generated on the switch?
A. passphrase
B. shared secret
C. self-signed certificate
D. encryption keys
Answer: D
HP HP0-Y30 HP0-Y30 HP0-Y30参考書 HP0-Y30認証試験
NO.2 You have uploaded an application file named "A12500.bin" to an HP A12500 switch.
Which command ensures this file is used during the next boot cycle?
A. boot-file cf:/A12500.bin main
B. load appfile cf:/A12500.bin main
C. boot-loader file cf:/A12500.bin main
D. set boot file cf:/A12500.bin main
Answer: C
HP HP0-Y30認定試験 HP0-Y30練習問題 HP0-Y30認定資格
NO.3 You must reset the startup configuration of an HP A-Series switch to factory defaults. Which CLI view
will enable you to complete this task?
A. manager view
B. global configuration view
C. system view
D. user view
Answer: D
HP HP0-Y30認定試験 HP0-Y30過去問 HP0-Y30
NO.4 You must configure a port on an A5800 switch to support protocol-based VLANs and port-based
VLANs. Which port type supports this requirement?
A. hybrid
B. access
C. aggregated
D. trunk
E. tagged
Answer: A
HP HP0-Y30 HP0-Y30参考書 HP0-Y30過去問
NO.5 What is the effect of the following command entered at the CLI of an HP E3500 yl switch?
E3500(vlan-44)#interface 23
A. The CLI displays the status of port 23.
B. Port 23 becomes a member of VLAN 44.
C. Port 23 is enabled.
D. The CLI enters the configuration context for port 23.
Answer: D
HP認定証 HP0-Y30 HP0-Y30過去問 HP0-Y30認証試験 HP0-Y30練習問題
NO.6 What is the effect of the following command entered at the CLI of an HP E5400 zl Series switch at
factory default settings.?
Switch# exit
A. The user is logged out of the console.
B. The privilege level moves from manager to operator.
C. Unsaved configuration changes are deleted.
D. The user exits from configuration mode.
Answer: B
HP認定資格 HP0-Y30認証試験 HP0-Y30 HP0-Y30
NO.7 Click the Exhibit button.
Which statement accurately describes the state of Gigabit Ethernet 3/0/12 in the HP A-Series switch
configuration shown in the exhibit?
A. The interface will be a tagged member of VLAN 12.
B. The interface will be an untagged member of VLAN 1.
C. The interface will be an untagged member of VLAN 12.
D. The interface will drop all incoming packets for VLAN 12.
Answer: C
HP HP0-Y30 HP0-Y30
NO.8 What is the effect of the following command entered at the CLI of an HP E5400 zl Series switch?
Switch(vlan-100)# end
"Pass Any Exam. Any Time." - www.actualtests.com 3
A. The CLI displays the Operator prompt.
B. The CLI displays the Manager prompt.
C. VLAN 100 is deleted from the switch.
D. The CLI displays the global configuration prompt.
Answer: D
HP参考書 HP0-Y30 HP0-Y30
NO.9 At the CLI of an HP E5406 zl switch, you have assigned ports A1-A4 to VLAN 70 as untagged
members. All other configuration parameters on the E5406 zl are at default settings. The E5406 zl is
connected through port B1 to an HP E8212 zl switch. The E8212 zl has been configured with an IP
interface associated with VLAN 70, and IP routing has been enabled. On the E5406 zl, what must you do
to enable the E8212 zl to act as default gateway for VLAN 70 clients?
A. Define an IP interface in VLAN 70.
B. Configure port B1 to be a member of VLAN 70.
C. Define the VLAN 70 IP address of the E8212 zl as the default gateway.
D. Add a static route to the E8212 to the E5406 zl route table.
Answer: B
HP参考書 HP0-Y30 HP0-Y30 HP0-Y30 HP0-Y30 HP0-Y30
NO.10 Which HP E-Series switch features redundant management and fabric modules?
A. E2910 al
B. E8212 zl
C. E5412 zl
D. E4208 vl
Answer: B
HP認証試験 HP0-Y30 HP0-Y30 HP0-Y30練習問題
NO.11 Which view is indicated by the following prompt on an HP A7500 switch? <A7500>
A. system
B. operator
C. user
D. console
Answer: C
HP問題集 HP0-Y30 HP0-Y30過去問 HP0-Y30問題集
NO.12 Which HP E-Series switch models are fixed-port switches? (Select two.)
A. E8212 zl
B. E4204 vl
C. E6600-24G
D. E5406 zl
E. E3500-48G yl
Answer: CE
HP認定証 HP0-Y30 HP0-Y30 HP0-Y30過去問
NO.13 You have initiated a console session on an HP A-Series switch at default settings. What is your
privilege level?
A. Visit (0)
B. Monitor (1)
C. System (2)
D. Manage (3)
Answer: D
HP認定資格 HP0-Y30 HP0-Y30認定証 HP0-Y30認定試験 HP0-Y30参考書 HP0-Y30
NO.14 You must configure VLANs and ports on an HP A7500 switch at default settings. What is the effect of
the following commands?
[SW-Gigabit-Ethernet1/0/1]port link-type trunk [SW-Gigabit-Ethernet1/0/1]port trunk permit vlan 100 101
A. The switch will forward traffic for VLANs 100 and 101 with 802.1Q tags. Traffic for VLAN 1 will be
untagged. Traffic for all other VLANs will be discarded.
B. The switch will add port 1/0/1 to a Link Aggregation Group (LAG) that is a tagged member of VLANs
100 and 101.
C. The switch will forward traffic for VLANs 100 and 101, but will discard traffic for all other VLANs.
D. The switch will forward VLAN 101 traffic with 802.1Q tags. VLAN 100 traffic will be untagged.
Answer: A
HP HP0-Y30 HP0-Y30認定資格
NO.15 Which interface is available for managing A-Series switches at factory default settings?
A. Telnet
B. menu
C. console
D. web
Answer: C
HP問題集 HP0-Y30認定証 HP0-Y30認定証
NO.16 You must define a hostname on an HP E5400 zl Series switch. Which configuration context must you
enter to perform this task?
A. manager
B. system
C. administrator
D. global configuration
Answer: D
HP HP0-Y30 HP0-Y30 HP0-Y30
NO.17 What is a fit Access Point?
A. an AP that can provide WLAN services without a controller
B. an AP that has no intelligence and requires a wireless controller
C. an AP that can be deployed autonomously or with a controller
D. an AP that provides some intelligence under the management of a controller
Answer: D
HP参考書 HP0-Y30認定資格 HP0-Y30問題集 HP0-Y30認定証
NO.18 You have entered the following command at the CLI of an HP E5400 zl Series switch. Switch(vlan-1)# ip
address 192.168.1.225/24
The switch's other VLAN and IP parameters are at factory defaults. While testing this configuration, you
find that the switch cannot ping a server located at 192.168.2.22. You have confirmed the server is up and
available. This server is located in a data center not directly connected to your switch.
What must you configure on the switch to enable connectivity between these two devices?
A. Add a default gateway.
B. Modify the IP address to 192.168.1.225/26.
C. Enable IP routing.
D. Add the server to allowed hosts list.
Answer: A
HP HP0-Y30 HP0-Y30 HP0-Y30
NO.19 Which type of port can handle more than one untagged VLAN on an HP A-Series switch?
A. trunk
B. access
C. aggregated
D. hybrid
Answer: D
HP問題集 HP0-Y30認定試験 HP0-Y30過去問 HP0-Y30 HP0-Y30
NO.20 Which A-Series switch is designed for the large data center and the enterprise core?
A. A5820
B. A7500
C. A9500
D. A12500
Answer: D
HP練習問題 HP0-Y30参考書 HP0-Y30
弊社のHPのHP0-Y30勉強資料を利用したら、きっと試験を受けるための時間とお金を節約できます。IT-Passports.comのHPのHP0-Y30問題集を買う前に、一部の問題と解答を無料にダウンロードすることができます。PDFのバージョンとソフトウェアのバージョンがありますから、ソフトウェアのバージョンを必要としたら、弊社のカスタマーサービススタッフから取得してください。
没有评论:
发表评论