人生には様々な選択があります。選択は必ずしも絶対な幸福をもたらさないかもしれませんが、あなたに変化のチャンスを与えます。IT-Passports.comのCompTIAのSG1-001試験トレーニング資料はIT職員としてのあなたがIT試験に受かる不可欠なトレーニング資料です。IT-Passports.comのCompTIAのSG1-001試験トレーニング資料はカバー率が高くて、更新のスピードも速くて、完全なトレーニング資料ですから、IT-Passports.com を手に入れたら、全てのIT認証が恐くなくなります。
IT-Passports.comのCompTIAのSG1-001トレーニング資料を利用したら、初めて試験を受けるあなたでも一回で試験に合格できることを保証します。IT-Passports.comのCompTIAのSG1-001トレーニング資料を利用しても合格しないのなら、我々は全額で返金することができます。あなたに他の同じ値段の製品を無料に送って差し上げます。
CompTIAのSG1-001認証試験はIT業界にとても重要な地位があることがみんなが、たやすくその証本をとることはではありません。いまの市場にとてもよい問題集が探すことは難しいです。IT-Passports.comは認定で優秀なIT資料のウエブサイトで、ここでCompTIA SG1-001認定試験の先輩の経験と暦年の試験の材料を見つけることができるとともに部分の最新の試験の題目と詳しい回答を無料にダウンロードこともできますよ。
IT-Passports.comのSG1-001問題集はあなたが信じられないほどの的中率を持っています。この問題集は実際試験に出る可能性があるすべての問題を含んでいます。したがって、この問題集をまじめに勉強する限り、試験に合格することが朝飯前のことになることができます。CompTIA試験の重要なの一環として、SG1-001認定試験はあなたに大きな恩恵を与えることができます。ですから、あなたを楽に試験に合格させる機会を逃してはいけません。IT-Passports.comは試験に失敗した場合は全額返金を約束しますから、SG1-001試験に合格することができるように、はやくIT-Passports.comのウェブサイトに行ってもっと詳細な情報を読んでください。
弊社が提供した問題集がほかのインターネットに比べて問題のカーバ範囲がもっと広くて対応性が強い長所があります。IT-Passports.comが持つべきなIT問題集を提供するサイトでございます。
CompTIAのSG1-001認定試験に受かるのはあなたの技能を検証することだけでなく、あなたの専門知識を証明できて、上司は無駄にあなたを雇うことはしないことの証明書です。当面、IT業界でCompTIAのSG1-001認定試験の信頼できるソースが必要です。IT-Passports.comはとても良い選択で、SG1-001の試験を最も短い時間に縮められますから、あなたの費用とエネルギーを節約することができます。それに、あなたに美しい未来を作ることに助けを差し上げられます。
試験番号：SG1-001問題集
試験科目：CompTIA 「CompTIA Storage+ Powered by SNIA Beta Exam」
問題と解答：全310問
中国でこのような諺があります。天がその人に大任を降さんとする時、必ず先ず困窮の中におきてその心志を苦しめ、その筋骨を労し、その体膚を餓やし、その身を貧困へと貶めるのである。この話は現在でも真です。しかし、成功には方法がありますよ。正確な選択をしたら、そんなに苦労しなくても成功することもできます。IT-Passports.comのCompTIAのSG1-001試験トレーニング資料はIT職員を対象とした特別に作成されたものですから、IT職員としてのあなたが首尾よく試験に合格することを助けます。もしあなたは試験に準備するために知識を詰め込み勉強していれば、間違い方法を選びましたよ。こうやってすれば、時間とエネルギーを無駄にするだけでなく、失敗になるかもしれません。でも、今方法を変えるチャンスがあります。早くIT-Passports.comのCompTIAのSG1-001試験トレーニング資料を買いに行きましょう。その資料を手に入れたら、異なる人生を取ることができます。運命は自分の手にあることを忘れないでください。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.it-passports.com/SG1-001.html
NO.1 The customer has an existing fabric switches installed from one manufacturer. They have decided to
add a redundant fabric using switches from a different manufacturer. Interoperability is their main concern.
What is important when considering interoperability in the SAN?
A. switch interoperability mode
B. HBA firmware/driver code
C. zone naming convention
D. virtualization engine
Answer: D
CompTIA SG1-001認定資格 SG1-001 SG1-001
NO.2 Which two (2) are advantages of ISL over-subscription? (Choose two.)
A. efficient ISL bandwidth utilization
B. lowers cost-per-port per installation
C. higher performance per ISL
D. enables zoning simplicity
E. more available F_Ports
Answer: A,E
CompTIA SG1-001 SG1-001
NO.3 What two (2) benefits does SCSI Command Tag Queueing provide? (Choose two.)
A. allows I/O requests to be queued to the device
B. determines the most efficient way to order & process commands
C. tags I/O requests so they can be executed first in first out
D. allows SCSI I/O throughput to equal rates of fibre channel
E. determines queue depth position
Answer: A,B
CompTIA SG1-001 SG1-001参考書 SG1-001認定証
NO.4 Last month, you successfully merged two (2) local SAN islands into a single core/edge fabric topology
and connected storage devices to the core switches. Performance benchmarks were met or exceeded. In
recent days, server administrators have documented a slow down in performance as I/O demands have
increased. Storage administrators report that all storage ports are under-utilized. What is the most likely
explanation?
A. conflicts between SAN routing protocols
B. storage port buffer credit limits have restricted I/O capabilities
C. multiple process login failures
D. over utilization of one or more ISLs
Answer: D
CompTIA認定証 SG1-001 SG1-001認証試験 SG1-001練習問題
NO.5 A storage configuration was created which stores large amounts of infrequently used documents. The
storage implementation is based on serial attached SCSI (SAS) and an edge expander. Almost all ports
are utilized, and a second edge expander will be installed. What is required to connect SATA devices to
the SAS domain?
A. SAS-SATA adapter
B. SAS-SATA protocol converter
C. cable with two SATA connectors
D. cable with a SAS and a SATA connector
Answer: C
CompTIA認証試験 SG1-001過去問 SG1-001認定証
NO.6 Which set of SCSI components are required to support SCSI command tag queuing?
A. adapter, adapter driver, device, device driver
B. adapter, device, device driver
C. adapter, device driver, controller, controller firmware
D. device, device driver
Answer: A
CompTIA SG1-001過去問 SG1-001練習問題 SG1-001 SG1-001
NO.7 A customer has a database server that processes a great deal of data very quickly. They have identified
a bottleneck in the storage subsystem and requested a change to the RAID configuration. How would you
configure the new RAID group? (Choose two.)
A. Stripe across 7200 rpm drives
B. Stripe across 15K rpm drives
C. RAID 6
D. RAID 1+0
E. RAID 5
Answer: B,D
CompTIA認定試験 SG1-001 SG1-001 SG1-001認定試験 SG1-001過去問
NO.8 The SAN audit reports that there is a single fabric in a full mesh topology. Which three (3) benefits result
from migrating to dual fabrics with full mesh topologies? (Choose three.)
A. less inter-switch links
B. simplifies manageability
C. protection from human error
D. reduction in maintenance activity
E. decreased maintenance disruption
Answer: A,C,E
CompTIA過去問 SG1-001 SG1-001認証試験
NO.9 University IT provides shared Fibre Channel storage services. All storage subsystems and fibre
channel switches are located in the secure campus datacenter. Each college and department provides
their own systems and staff. Central IT provides fabric, storage and backup administration. Which security
mechanism is most important in this Fibre Channel infrastructure?
A. FCPAP
B. link encryption
C. switch authentication
D. port authentication
Answer: D
CompTIA認定資格 SG1-001過去問 SG1-001認証試験
NO.10 A production cluster is attached to redundant disk fabrics and a tape fabric. Each cluster member has
access to twelve (12) TB of RAID 5 production storage and twelve (12) TB of RAID 0 local replica
accessed through eight HBAs single initiator zoned to sixteen storage ports on one storage subsystem.
The tape fabric includes one connection to each server and connections to four (4) 1Gb FC to SCSI
gateways connected to ten (10) LTO II (35MB/s) tape drives. The standby cluster member performs
multi-threaded backups using the local replica. All HBAs and ports are 2Gb/s. If the recovery time is equal
to backup time, where is the bottleneck?
A. Tape HBA
B. Disk HBAs
C. Tape Drives
D. FC to SCSI Gateway
Answer: A
CompTIA SG1-001 SG1-001認定試験 SG1-001 SG1-001認定試験
NO.11 After a company experienced a localized disaster, the Business Continuance Plan was reviewed. The
plan was revised to include a Recovery Time Objective (RTO) of four (4) hours and a Recovery Point
Object (RPO) of one hour. What two (2) processes must be implemented to support this requirement?
(Choose two.)
A. mirrored snapshots of data and applications
B. backup tapes recovered from offsite storage
C. data snapshots from the previous day
D. operating system and application reinstallation media
E. hot or warm site
Answer: A,E
CompTIA問題集 SG1-001 SG1-001 SG1-001認定試験 SG1-001過去問
NO.12 Two servers have been connected to a SAN with redundant fabrics and the zone configuration needs to
be changed. How can you safely change the zone configuration?
A. Save the current zone configuration to disk, modify it and apply it to both fabrics simultaneously to
avoid segmentation.
B. Modify the zone configuration on one fabric, test it, and then modify the zone configuration on the
second fabric.
C. Modify the zone configuration on one fabric, test it, and then copy the zone configuration to the second
fabric.
D. Modify the zone configuration on both fabrics at the same time, enable them simultaneously to avoid
segmentation.
Answer: B
CompTIA SG1-001 SG1-001
NO.13 Your customer has upgraded to faster tape technology and the backup is now taking longer. No other
changes have been made. What is a possible cause of the performance degradation?
A. tape buffer overload
B. hardware compression
C. backup server cannot sustain required throughput
D. serpentine recording changed to helical scan technology
Answer: C
CompTIA認証試験 SG1-001参考書 SG1-001 SG1-001
NO.14 A two fabric merge has failed leaving you with segmented fabrics. Which could be the the cause of the
segmented fabrics?
A. unique domain Ids
B. identical zone names
C. timeouts set to equal values
D. non-compatible interoperability modes
Answer: B
CompTIA SG1-001 SG1-001過去問 SG1-001問題集 SG1-001
NO.15 What enables a virtual machine to have a unique World Wide Port Name?
A. Address Replacement Protocol
B. Virtual Machine Address Translation
C. N_Port ID Virtualization
D. extended WWID Architecture
Answer: C
CompTIA SG1-001 SG1-001認証試験 SG1-001認定証
NO.16 You have a single fabric with four servers connecting to an edge switch in a core edge configuration with
single 2Gb/s ISLs to the core. Each server has an average throughput requirement of 40MB/s. Under
which circumstance would you need to add a second ISL?
A. to provide a redundant path
B. to avoid congestion on the ISL
C. to separate out FSPF updates
D. to provide a management path
Answer: A
CompTIA参考書 SG1-001 SG1-001 SG1-001認定試験
NO.17 You are the system administrator of a medium-sized manufacturing company. The chief executive
officer (CEO) is concerned about business continuity in case of a disaster. He constituted a project team
to develop a business continuity and disaster recovery solution. The team is discussing online backup
strategies. What affects time-to-create and incremental update of a copy-on-write snapshot?
A. number of files
B. number of LUNs
C. size of snap volume
D. size of LUN
Answer: D
CompTIA SG1-001練習問題 SG1-001
NO.18 A server administrator notices when a specific server is re-booted its SAN storage is sometimes visible
and sometimes it is not. After examining the SAN switch logs, no FLOGI message has been received on
that port. Which HBA parameter is a most likely cause?
A. Port Link/Speed is set to Autonegotiate.
B. WWPN reset timeout is set too low.
C. R_A_TOV does not match.
D. HBA Port Type is set to "E-Port"
Answer: A
CompTIA SG1-001 SG1-001認定試験 SG1-001参考書
NO.19 The storage administrator has a request to add more storage to support added features on an
application. Which two (2) steps must be taken for the application to recognize the added storage?
(Choose two.)
A. re-scan the SCSI bus
B. enable array re-scanning
C. configure LUN masking
D. zone the host to the subsystem port
E. increase the HBA time out value
Answer: A,C
CompTIA SG1-001 SG1-001 SG1-001
NO.20 An application administrator seeks to improve the I/O performance of the server's SAN-attached
storage. Which HBA parameter setting change can affect the performance?
A. Queue Depth
B. PCI Connection Type
C. NL-Port Mode
D. SCSI ID Mapping
Answer: A
CompTIA認定資格 SG1-001 SG1-001問題集 SG1-001過去問 SG1-001
IT-Passports.comは異なるトレーニングツールと資源を提供してあなたのCompTIAのSG1-001の認証試験の準備にヘルプを差し上げます。編成チュートリアルは授業コース、実践検定、試験エンジンと一部の無料なPDFダウンロードを含めています。
没有评论:
发表评论